A Vance company - serving Summerlin, NV
Gate Repair in Summerlin, NV | Vance Gate Repair Summerlin

Gate Repair in Summerlin - On-Site in 60 Minutes, Fixed the Same Day

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Trusted Gate Repair for Summerlin Homeowners

A gate that won’t open, won’t latch, or won’t close all the way is a security problem before it’s a convenience problem. Most of the calls we take from Summerlin start the same way: the gate worked yesterday, and this morning the arm is straining, the keypad is dark, or the gate hangs at the latch and won’t finish the cycle. Our technicians have up to 12 years of experience across residential and light commercial gates, and we can usually get to a Summerlin driveway the same day you call. We answer the phone at any hour, seven days a week, at (844) 797-2809.

Call (844) 797-2809

Summerlin sits on the west edge of the valley, and that geography shapes what fails. The afternoon sun hits a west-facing gate for hours, the dust that blows in off the open desert works its way into hinges and track, and the temperature swing between a hot afternoon and a cool night works on welds and post footings. We see specific patterns here, and we price them before anyone picks up a tool.

Key Takeaways

  • Electric and automatic gate repair in Summerlin typically runs $185 to $650 depending on the part and the brand.
  • You get a written price before any work starts, every time.
  • We service nine major automation brands, including LiftMaster and FAAC, so we can work on whatever motor your gate already has.
  • Every visit ends with a photo record of what we found, what we adjusted, and what we replaced.
  • Every completed repair is covered by the 365-Day Done Right Promise.

What Our Gate Repair Service Includes

Electric Gate Repair

An electric gate is the full system: the motor, the control board, the power supply, the safety devices, and the wiring that ties them together. When one part fails, the whole gate stops, and the trick is finding which part failed instead of guessing at the most expensive one. You need electric gate repair when the gate stops mid-cycle, when the control board clicks but nothing moves, or when a keypad or remote stops communicating. What we do in Summerlin is test the system in order – voltage at the transformer, continuity in the loop, the state of every safety input – and document each reading before we change anything. Commercial access-control work taught us that a written voltage log is worth more than a guess.

Electric Gate Repair

Automatic Gate Repair

Automatic gate repair covers the operator itself: the arm on a swing gate or the motor housing on a sliding gate, plus the limit switches that tell the unit when to stop. You need this service when the gate reverses for no reason, when it jerks or stutters through its arc, or when the arm runs but the gate barely moves. On a FAAC or LiftMaster operator, a limit switch set a few degrees past travel is often the whole problem, and we reset it and photograph the new position before we leave. We can work on whichever brand your gate has rather than steering you toward a replacement.

Automatic Gate Repair

Hinge & Post Repair

Hinges carry the weight of the entire leaf, and posts carry the hinges, so these two fail together more often than people expect. You need hinge and post repair when a gate sags at the outer edge, when the hinge plate is loose or cracked, or when the gate drags on the ground as it swings. Desert soil and irrigation both matter here: a post that wasn’t set deep enough can shift seasonally, and once it moves, the hinge alignment goes with it. What we do is measure the post plumb, assess the footing, and either reinforce the existing hardware or reset the post so the gate swings true again.

Hinge & Post Repair

Gate Realignment

Realignment is the adjustment work that gets a gate closing into its latch and stopping cleanly at both ends of its travel. You need a realignment when the gate rubs the latch post, when it drifts open on its own, or when it slams instead of closing softly. Sometimes a single hinge has worn a quarter inch and that’s enough to throw the whole leaf off, so we check hinge wear, post plumb, and operator limit settings in the same visit. What we leave behind is a gate that closes the same way every time, plus a photo log of every adjustment we made.

Lock Repair

Lock repair covers the mechanical latch, the magnetic lock on an access-controlled gate, and the keypad or reader that releases it. You need lock repair when the keypad won’t accept the code, when the latch tongue won’t retract, or when the gate closes but never actually secures. On a DoorKing or similar access unit, a dead strike or a failed reader is a common culprit, and we test the release circuit directly rather than assuming the lock is bad. What we do is diagnose whether the fault is in the lock, the wiring, or the control board, then document the wiring and the part we installed.

Weld & Rust Repair

Weld and rust repair addresses the frame: cracked welds at the corners, rust blooming at the bottom rail from landscape irrigation spray, and pitting on the hinge weldments. You need this service when you can see a rust line creeping up a stile, when a weld has cracked at a joint, or when a gate feels flexible in the middle of its swing. What we do is grind back the rust, re-weld the failed joint, and treat the bare steel, then check that the repair didn’t throw the gate out of square. Welding is a heat-and-structure job, so we always verify alignment after the weld has cooled.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 797-2809

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Brands We Service for Gate Repair

Technician performing professional gate hardware installation and repair
Brands We Service for Gate Repair

We service LiftMaster operators regularly, and we know where they wear: the limit switches drift, the battery backup fails quietly, and the drive gear wears out long before the motor does. FAAC swing operators show a different pattern, usually arm bracket wear and hydraulic fluid loss on the older 400-series units, and we check those specific points first rather than starting from scratch each time. BFT equipment is robust but its control logic is particular about safety inputs, so a single misaligned photo-eye can take the whole gate down until it’s reset.

We also service Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whether you have a LiftMaster arm and a Mighty Mule board or a FAAC operator and a BFT reader, we can work on the system in front of us. We’re not tied to any single brand and we don’t steer repairs toward replacement when a component fix will do. Nine major automation brands means one company can handle whatever motor is already on your property, and our technicians’ up to 12 years of experience means we’ve met most of these failures before. Whether you have a Mighty Mule or any other make, we can help.

BeforeBefore
AfterAfter

Signs You Need Gate Repair Right Now

  • The gate reverses or stops mid-cycle. This usually means a safety device, a limit switch, or a control-board fault, and it can leave the gate stuck open rather than closed. A gate that won’t close is a security gap you don’t want to sit on overnight.
  • The arm runs but the gate barely moves. A straining operator is often a worn drive gear or a seized hinge dragging against it, and continuing to run it can burn out the motor. That turns a small repair into a motor replacement.
  • The gate sags, drags, or hits the ground. A sagging leaf points to worn hinges or a shifting post, and the longer it drags the more the frame twists. Getting it realigned early protects the gate itself.
  • The keypad or remote stops working. A dead keypad or an unresponsive remote can be as simple as a failed battery or as involved as a control-board fault. We test the release circuit so we know which it is before we quote.
  • You can see rust or a cracked weld. Rust creeping up the bottom rail or a cracked corner weld weakens the whole frame, and a gate that flexes in its swing is one that will eventually fail. Weld repair early is cheaper than replacing the leaf.

Our Gate Repair Process – Step by Step

professional gate repair service
Our Gate Repair Process – Step by Step
  1. 1
    Call and describe the symptom. A live person answers at any hour, and the more you can tell us – does it reverse, does it strain, is the keypad dark – the better we can prepare before we arrive in Summerlin.
  2. 2
    On-site diagnosis with the right tools. We test voltage at the transformer, read the limit-switch positions, check continuity through the safety loop, and plumb the post. We photograph what we find so the diagnosis is on the record, not just in our head.
  3. 3
    A written price before any work starts. Under the Haven Standard, the flat price is written and handed to you before a tool comes out of the van. No “call for a quote,” no surprise invoice at the end.
  4. 4
    The repair, done and verified. We complete the fix, then run the gate through full open and close cycles to confirm the limit settings, the safety devices, and the latch all hold. If a photo-eye or safety edge is involved, we confirm it stops the gate as it should.
  5. 5
    A documented record before we leave. You get a photo log of every adjustment and a written record of the part number installed, filed in the job record so no future technician has to rediscover the same problem. Every completed repair is backed by the 365-Day Done Right Promise.

If you’ve got a written estimate from another company and want a second look, we’ll review that paperwork at no cost before you commit to anything.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Get the price in writing before anything starts.Serving Summerlin - a real person answers, day or night.
Call now

How Much Does Gate Repair Cost in Summerlin?

Gate repair in Summerlin typically runs $185 to $650, depending on the part and the system. A hinge and realignment job is usually at the low end, an electric or automatic operator repair sits in the middle, and a control-board or motor replacement pushes toward the top. Here’s how common repairs break down:

Repair Typical Summerlin Range What drives the price
Hinge & post repair $185 – $350 Number of hinges, whether the post needs resetting
Gate realignment $150 – $300 Hinge wear, post plumb, operator limit reset
Lock / keypad repair $175 – $400 Whether the fault is the lock, the wiring, or the board
Weld & rust repair $250 – $550 Number of welds, rust severity, refinishing
Automatic / electric operator repair $300 – $650 Brand, part availability, board vs. motor vs. arm

What affects the price most is the brand and the part: a LiftMaster limit switch is a different line item than a FAAC arm bracket, and a control board costs more than a photo-eye. The best way to avoid overpaying is to get the diagnosis documented and the price in writing before work begins, which is the whole point of Clause 1 (Have it in writing). Our estimate is free, and it includes the written price and a photo record of what we found at no additional charge. Call (844) 797-2809 for an exact quote on your gate.

Gate Repair Near Summerlin – Our Service Area

professional repairing a decorative stone gate pillar with sealant
Gate Repair Near Summerlin – Our Service Area

We handle gate repair across Summerlin and the surrounding west valley, including Gate Repair in Spring Valley and the neighborhoods along the 215. Response times are usually same-day for Summerlin proper, with Spring Valley and the central valley close behind. If you’re further out in Henderson or Boulder City, call and we’ll confirm the timing before you commit to a window.

Serving Summerlin, NV – Our Local Coverage Area

We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions – Gate Repair in Summerlin

Two professional technicians installing a decorative metal security gate
Frequently Asked Questions – Gate Repair in Summerlin

Schedule Your Gate Repair Service in Summerlin Today

Don’t let a gate that won’t close or a straining operator turn into a bigger repair. Call (844) 797-2809 and a live person answers at any hour, seven days a week. You’ll get a free estimate, a written price before any work starts, and a photo record of every adjustment we make. Every repair is backed by the 365-Day Done Right Promise, and same-day service is usually available in Summerlin. No obligation, no surprise invoice – just the price in writing.

Written by the team at Vance Gate Repair Summerlin.

Why Summerlin Chooses Vance Gate Repair Summerlin

We set the standard for gate repair in Summerlin.

30-60 Min Response

Fast dispatch across Summerlin. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Summerlin

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Summerlin - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Summerlin Customers Say

Trusted by homeowners across Summerlin and surrounding areas.

★★★★★

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

Camille R.
★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.
★★★★★

"Good work on a long driveway gate. Arrived when they said, finished when they said."

Sofia E.

Ready for Gate Repair in Summerlin?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Summerlin.

(844) 797-2809

Request a Free Estimate in Summerlin

Tell us about your gate repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch