Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterGate Realignment in Summerlin, NV
Gate realignment in Summerlin typically runs $185 – $420 and is usually completed in a single visit. Realignment means bringing a driveway or pedestrian gate back to true: squaring the frame, resetting hinges or pivot points, adjusting the gate arm bracket, and re-aiming photo-eyes and limit switches so the gate travels cleanly through its full arc without dragging, sagging or hitting the stops. If your gate has started scraping the ground, dragging on one corner or binding halfway open, the frame or hardware has moved and needs to be brought back to plumb. Call (844) 797-2809 and a live person answers any hour of the day or night.
Vance Gate Repair Summerlin handles realignment across the valley, from the older estate gates in The Ridges to newer builds in Redpoint and Stonebridge, where the gate arm brackets settle with the summer heat. We start under the Gate Repair umbrella: if the realignment turns out to be a failing hinge or a cracked post base, we write a scope for the repair and the price for both before any tool comes off the truck. Under The Haven Standard, every visit gets a written price before work begins and a documented photo record when the technician leaves.
Our technicians bring up to 12 years of experience to each gate, which matters for how a sagging gate reads. A gate that binds at the latch for the first 30 degrees is usually a hinge problem. One that pulls tight at 80 degrees is usually a frame or post issue. We check both before writing the price, because the wrong realignment just moves the problem three feet down the driveway.
When You Need Gate Realignment
- The gate drags or scrapes the ground. In Summerlin’s summer heat, the ground dries and shifts a few millimeters while the steel or aluminum gate expands. A gate that cleared the ground in spring can scrape in July. If you hear it before you see it, it’s usually the drag that starts first.
- The gate binds halfway and the motor strains or reverses. The frame has gone out of square, so the gate is fighting its own arc. On a LiftMaster or FAAC arm, this shows up as a bad limit switch or a motor that clicks off mid-travel. Once the frame is true, the arm and limits get reset to match.
- The gate hits the latch post or stops short. This usually points to a hinge or pivot that has walked out of position. On a Mighty Mule or BFT gate, the arm bracket shifting a quarter inch off its mounting marks is enough to stop the gate 4 – 6 inches from latch.
- The photo-eye misaligns and the gate refuses to close. Realignment of the frame can knock the safety eyes out of line. If the gate reverses every time it tries to close, we re-aim the beam and photograph the new position.
- A storm or vehicle strike nudged the post or arm. Summerlin’s monsoon season does a fair amount of gate damage in an afternoon. A gate that swung clean on Tuesday and closes crooked after a Thursday windstorm is a realignment visit, not a motor replacement.
- The previous company told you to replace the motor. Realignment first, motor diagnosis second. A motor straining against a misaligned gate reads like a failing motor on a meter. Once the gate travels freely, more than a few motors come back to life.
Our Gate Realignment Process

- Walk the gate and record what we find. We measure the gap at the ground, check the frame for square, inspect each hinge and pivot point, and read the motor’s limit settings. We photograph every reading before touching anything.
- Diagnose before adjusting. A sagging gate at the hinge end is one problem. A gate binding mid-travel is another. We test both on the same visit so the price we write covers the actual problem, not a guess.
- Reset hinges, pivots and posts to plumb. We true the gate frame and adjust the hinge or pivot hardware back to spec. If a post base has shifted, we shim or brace it and document the fix, because a gate realigned on a crooked post will sag again within months.
- Re-aim the photo-eye and reset the limit switches. Once the gate travels true, we set the limits to match, re-aim the photo-eye, and test the safety reverse from both directions. The gate must stop and reverse cleanly when something crosses the beam.
- Test the full cycle, then leave the record. We run the gate open and closed three times, then hand you the photo log. It records the measured gap before and after, the part numbers for anything replaced, and the setting each limit switch now reads. That document goes into the job record. If a future technician or another company arrives, they can see what was set instead of re-diagnosing the same problem. You only pay for realignment once.
Safety note: gate frames and hinges can store serious force, and an arm that is still under spring or actuator load will release with the gate when a pin comes out. Realigning a gate safely is a job for a trained technician. We don’t recommend homeowners adjust pivots, hinges or arm brackets themselves, and we don’t. The gate is a machine that can injure someone if a pin lets go while it’s loaded. Call us and let the gate stay put.
Before
AfterGate Realignment Pricing in Summerlin
Most straightforward realignments run $185 – $320. Jobs that also need hinge or pivot hardware replacement, or a shifted post base corrected, land in the $320 – $520 range. The price you see in the written quote is the price you pay: under Haven Standard Clause 1, the written price gets handed over before any work starts, with no surprise line items at the end. If you have a written estimate from another Summerlin gate company, we’ll review it free of charge and tell you whether it’s fair before you commit.
| Gate realignment scope | Typical range |
|---|---|
| Standard swing or driveway gate realignment on intact hardware | $185 – $280 |
| Realignment plus hinge, pivot or arm-bracket replacement | $260 – $420 |
| Post-base correction or shimming, plus realignment | $340 – $520 |
| Realignment plus photo-eye re-aim and limit-switch reset (automated gate) | $220 – $380 |
What moves a job up or down the range: the size and weight of the gate, whether the frame is a welded steel estate gate or a lighter aluminum pedestrian gate, whether the post base has shifted, and whether the gate is automated. Realigning a single-arm LiftMaster gate is different from realigning a dual-leaf BFT estate gate. Every quote includes the photo record and the written price, both of which are part of the job, not an add-on.
FAQs – Gate Realignment

How much does gate realignment cost in Summerlin, NV?
Gate realignment in Summerlin generally costs between $185 and $420, depending on the gate type, whether hardware needs replacing and whether the post base has shifted. The written quote you get before work starts is the final price. Call (844) 797-2809 for an exact quote on your gate; estimates are free and written.
Can you realign a driveway gate the same day?
Most realignment calls in Summerlin are completed on the first visit, since the work is hardware adjustment rather than part replacement. Call (844) 797-2809 and tell us the gate type and the symptom (binding, scraping, not latching) so the technician arrives with the right hinge kit and adjustment tool in hand.
Is it cheaper to realign the gate or buy a new one?
Realignment is almost always the cheaper path: it’s a fraction of the cost of a new automated driveway gate. Realignment is the first step before you consider replacement, because a gate that travels true can often keep running on its existing motor for years. If our technician finds a structural problem, we’ll write it out in the report before recommending anything beyond realignment. Call (844) 797-2809 to book a free estimate and get the honest picture of the gate’s condition.
Will realigning the gate fix my motor?
Realignment often resolves the motor symptoms, because a motor that struggles against a misaligned gate is fighting force it was never designed to carry. We realign the gate first, then re-test the motor and its limit switches. If the motor is genuinely at fault, we service nine major automation brands, including Mighty Mule, LiftMaster, FAAC and BFT, so we can repair the motor you already own instead of steering you into a replacement. Call (844) 797-2809 to book the assessment.
You can also read more about our broader work under home gate repair if the problem is wider than a realignment, or check out the Gate Repair in Summerlin overview for how the full repair process works.
Ready to get your gate back to true? Call Vance Gate Repair Summerlin at (844) 797-2809 for a free estimate. Every job gets a written price before work begins, a documented photo record when the technician leaves, and the 365-Day Done Right Promise: if the realignment isn’t right, we make it right at no additional charge. A live person answers the phone any hour, so call whenever the gate starts dragging and we’ll take it from there.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin.