A Vance company - serving Summerlin, NV

Electric Gate Repair in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Electric Gate Repair in Summerlin, NV

Electric gate repair in Summerlin typically runs $185 to $420 for a diagnostic visit plus the first repair, with most swing- and slide-gate fixes landing near the low end and motor or control-board replacements pushing higher. If your gate stopped responding to the remote, moves a foot and reverses, or opens on its own at 2 a.m., we fix the automation itself, not just the symptom. Vance Gate Repair Summerlin works on the motor, the control board, the safety sensors, and the wiring that ties them together, and we hand you a written price before we touch a screwdriver. Call (844) 797-2809 and a live person picks up, day or night.

This page covers the electrical and automation side of Gate Repair. If your gate is physically off its track, sagging on a hinge, or the post itself is loose, that’s structural work and the parent service is the better starting point. For everything from a dead keypad to a LiftMaster arm that clicks but won’t move, you’re in the right place.

Key Takeaways

  • Most electric gate repairs in Summerlin cost $185 to $420; full motor replacement usually runs $650 to $1,400 depending on brand and gate weight.
  • We service nine major automation brands, including Mighty Mule, LiftMaster, FAAC, and BFT, so we work on the motor already on your property rather than pushing a full replacement.
  • Every visit ends with a photo record of what we found, what we adjusted, and what we installed, plus a written price that was handed over before work started.
  • The 365-Day Done Right Promise covers every repair for a full year: if it isn’t right, we make it right at no additional charge.

When You Need Electric Gate Repair

Electric gates fail in patterns, and after enough Summerlin service calls you start to recognize them. Here’s what homeowners describe when they call us:

  • The gate opens a few feet and reverses. Almost always a misaligned safety photo-eye (the infrared beam that stops the gate if something crosses the path) or a limit switch set past travel. On Las Vegas valley heat, the sun bakes one sensor housing more than the other, and the beam drifts. We realign and photograph the new position.
  • The remote stopped working but the keypad still does. That points at the receiver or a dead battery in the remote, not the motor. We test both before recommending a part.
  • The gate hums, clicks, or does nothing when you press the button. Classic control-board or capacitor failure. With Mighty Mule and LiftMaster units we often can repair the board rather than replace the whole operator.
  • The gate opens by itself, or won’t close at all. A shorted loop, a stuck reverse sensor, or a limit switch that’s walked out of position. On Summerlin properties near the trails and washes, blowing grit gets into the operator housing and jams the mechanism over time.
  • The arm bracket is bent or the gate drags. A FAAC or BFT swing arm that’s been pushed against takes the bracket out of true. We check the bracket as part of any motor service, because a new motor on a bent arm fails the same way.
  • You inherited a gate and don’t know who installed it. We identify the brand, read the control board, and leave you a wiring diagram and photo log so the next technician isn’t starting from zero.

If you’re seeing any of these, don’t wait for the gate to fail open in the middle of the night. A gate that won’t secure is a gate that isn’t doing its job.

Our Electric Gate Repair Process

Technician performing professional gate hardware installation and repair
Our Electric Gate Repair Process

Every electric gate visit follows the same order, and the documentation is the reason a second trip costs less than the first one did.

  1. Diagnostic visit with a written price. We test the operator, the control board, the safety sensors, and the wiring before quoting. You get a flat written price that covers the diagnosis and the first hour of repair, and it’s in your hands before any work starts.
  2. Identify the brand and read the board. Whether it’s a Mighty Mule DIY-era unit or a commercial-grade BFT arm, we pull the model, read the fault codes, and confirm the part numbers before ordering anything.
  3. Repair or replace, based on evidence. A burned capacitor gets replaced. A control board with a failed relay gets replaced. A motor with worn brushes and a cracked gearbox gets quoted for replacement, with the old part shown to you. We don’t steer toward replacement when a repair will hold.
  4. Reset limits and test safety systems. After the fix, the limit switches get set to spec, the photo-eye gets realigned and tested against a crossing object, and the gate runs a full open-close cycle under load. We photograph the readings.
  5. Leave the record. Before we go, you get a photo log of what we found, what we set, and the part number installed, plus the written record of the work. It’s filed in the job record so the next service call starts from a known baseline.

Our technicians have up to 12 years of experience, and that background shows up most in steps 2 and 3, where knowing the difference between a repairable board and a dead one saves real money. Under the Haven Standard (Clause 4, Evidence on every job), every visit includes a documented photo record at no additional charge.

BeforeBefore
AfterAfter

Electric Gate Repair Pricing in Summerlin

Here’s what electric gate work actually costs in Summerlin, written out so you can budget before you call. These are the ranges we work from; the written price on your job comes after the diagnostic, and it’s yours to keep whether or not you hire us.

Service Typical price range
Diagnostic visit + first repair hour $185 – $295
Safety photo-eye realignment or replacement $150 – $260
Limit switch adjustment or replacement $140 – $240
Remote / receiver repair or reprogramming $95 – $180
Control board repair or replacement $320 – $650
Swing-arm or slide motor replacement $650 – $1,400
Full keypad / access-control install $350 – $800

Three things move the price the most. The brand matters, because a LiftMaster or Linear board is stocked differently than a FAAC or BFT board ordered to spec. Gate weight matters, because a heavy ornamental steel gate loads the motor harder and often needs a heavier-duty operator. And access matters: if the operator housing has been buried behind landscaping or a gate has no service clearance, the labor for the visit goes up. We tell you which factor is driving your number.

Springs on swing gates carry stored tension and can cause serious injury if released without the right tools, and the same is true of a gate that moves under power while you’re working near the arm. That’s a job for a trained technician, not a weekend project. If another company has given you a written estimate, bring it in: we’ll review it as a free second opinion at no cost, under Clause 1, “Have it in writing.”

How Long Does Electric Gate Repair Take in Summerlin?

professional gate repair service
How Long Does Electric Gate Repair Take in Summerlin?

Most electric gate repairs take one to three hours on site once the right part is in hand. Sensor realignment, limit-switch resets, and remote reprogramming are same-visit jobs. Motor or control-board replacement can stretch to a half day, and if the part has to be ordered for a specific brand, expect a return visit. We tell you the timeline in writing when you get the quote, so there’s no guesswork about whether you’ll have a working gate by evening.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

Can You Repair the Motor Already on My Gate?

Yes, and that’s the point. We service nine major gate-automation brands, including Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite, so we’re not limited to whatever one manufacturer we happen to install. A homeowner with an older Mighty Mule that’s been failing for two seasons gets the same evidence-first repair as a property with a commercial-grade BFT arm. If the motor can be rebuilt or repaired, we quote the repair. Replacement is offered only when the evidence says the old unit won’t hold.

FAQs – Electric Gate Repair

professional repairing a decorative stone gate pillar with sealant
FAQs – Electric Gate Repair

How much does electric gate repair cost in Summerlin?

Electric gate repair in Summerlin runs $185 to $420 for most fixes, with sensor realignment and limit-switch work near the bottom and control-board or motor replacement at the top. Motor replacement on a swing or slide gate typically runs $650 to $1,400 depending on brand and gate weight. Call (844) 797-2809 for an exact quote; the written price is free and in your hands before any work begins.

Can you come out the same day?

Same-day service is often available, and a live person answers our phone 24 hours a day, so you’re never routed to voicemail or a callback queue. Call (844) 797-2809 and we’ll tell you the soonest we can be on site and give you a written price range for the visit.

Why does my gate open on its own or refuse to close?

A gate that opens by itself or won’t close usually has a misaligned safety sensor, a shorted loop, or a limit switch that’s moved out of position; none of these means the motor is dead. We diagnose the sensor and switch first, because replacing a motor that only needed a realignment wastes your money. Call (844) 797-2809 and we’ll schedule a diagnostic with a written price.

Is it cheaper to repair or replace an electric gate motor?

Repair is almost always cheaper when the operator’s core is intact, and we default to repair when the evidence supports it: a $320 to $650 board repair beats a $650 to $1,400 motor replacement. Replacement only makes sense when the gearbox is worn, the housing is compromised, or the unit is out of production with no parts available. We show you the failed part and explain which path holds, then you decide. Call (844) 797-2809 for a written quote on either option.

Electric gate problems rarely fix themselves, and a gate that’s stuck open is a gate that isn’t doing its job. If your gate is clicking, reversing, or silent, call (844) 797-2809 for a free estimate. You’ll get a written price before work starts, a photo record when the technician leaves, and the 365-Day Done Right Promise standing behind the repair for a full year. Our technicians have up to 12 years of experience, and a live person is ready to take your call right now.

Written by the team at Vance Gate Repair Summerlin, serving Summerlin.

Need Gate Repair help in Summerlin? Licensed & insured · 1-hour response · free estimates
Call (844) 797-2809
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Vance Gate Repair Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch