Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterLock Repair in Summerlin, NV
Lock repair in Summerlin usually costs $95 to $260 and covers the hardware on a driveway gate: the latch, the lock cylinder, the keypad, the release mechanism, and the low-voltage wiring that ties them together. Most of the calls we run here start the same way. A homeowner turns the key and nothing catches, or the gate swings shut but never actually locks, or the keypad beeps and the gate ignores it. We fix the lock itself rather than talking you into a new gate, and we write the price down before we touch anything. Call (844) 797-2809 and a live person picks up, day or night.
Lock work on a gate is its own discipline. The lock isn’t a deadbolt on a door. It’s a latch and strike that has to line up with a gate that shifts a little every summer, wired into an operator that decides when the gate is allowed to lock. Get one piece wrong and the gate either won’t secure or won’t open, and sometimes both on the same day. Our technicians have up to 12 years of experience with exactly this kind of hardware, and every visit runs under The Haven Standard: written scope, written price, documented photo record. If you’re chasing a wider problem, our Gate Repair in Summerlin page covers the full range of gate faults we handle.
Key Takeaways
- Most Summerlin gate lock repairs run $95 to $260, priced in writing before work starts.
- We repair latches, cylinders, keypads, strikes, and release hardware on swing and slide gates.
- We service the automation brands already on the property, including LiftMaster, FAAC, BFT, and Mighty Mule.
- Every repair carries the 365-Day Done Right Promise: if it’s not right, we make it right at no charge.
- A live person answers the phone 24/7, and you get a photo record of what we found and what we set.
When You Need Lock Repair

Summerlin gates take a specific kind of wear. The desert swing between a 105-degree July and a cold January moves wood, vinyl, and steel just enough to throw a latch out of line, and the fine grit that blows through the valley works into cylinders and keypads. Here’s what we see most often:
- The key turns but the latch won’t release. Usually a worn cylinder or a latch bolt that has drifted out of alignment with the strike plate. Common on older steel swing gates in the Trails and the Ridges, where the hinge side has settled a quarter inch over the years.
- The gate closes but doesn’t actually secure. The latch tongue misses the strike, or the strike has been bent by the gate slamming. You get a gate that looks locked and pushes open with one hand.
- The keypad stopped working. Often a dead battery, a wet connection, or low-voltage wiring that has corroded at the terminal. We test the keypad and the wiring before suggesting a replacement.
- The electric lock buzzes or hums but won’t engage. Typically a power or wiring fault at the lock, not the lock itself. We trace the circuit and photograph the reading so there’s a record.
- The manual release is stuck or frozen. The release lever or cable that lets you open the gate by hand during a power outage. If it won’t move, you’re locked in or out, and that’s a repair we take seriously.
- The lock and the operator disagree. The gate tries to open while the lock is still engaged, which grinds the mechanism. This one gets worse fast, so call it in early.
Before
AfterOur Lock Repair Process
Every lock job follows the same sequence. No shortcuts, no guesswork, and no picking up a tool until you’ve seen the price.
- We answer and ask the right questions. A live person takes your call, day or night, and gathers the model of your gate operator and what the lock is doing. You’ll know before you hang up whether this sounds like a wiring issue, a mechanical latch problem, or both.
- We inspect and diagnose on site. We check the latch alignment, the strike, the cylinder, the release mechanism, and the low-voltage lock wiring. We measure the gate’s swing and note any hinge sag that’s pushing the latch out of line.
- We hand you the written price. Before any work starts, you get a written scope and a flat price. If the diagnosis changes once we’re inside the mechanism, we stop and re-quote. You never get a surprise invoice at the end.
- We repair the lock. That means a new cylinder, a re-aligned strike, a rebuilt latch, a replaced keypad, or a wiring repair, depending on what we found. We work with the automation brands already on your property, whether that’s a LiftMaster operator, a FAAC arm, a BFT system, or a Mighty Mule unit.
- We test under real conditions. We cycle the gate open and closed several times, check that the lock engages and releases cleanly, and confirm the release mechanism works by hand.
- We hand you the record. Before we leave, you get a photo log of what we found, what we adjusted, and the part number we installed, plus a written record filed in the job. Under Clause 4 of The Haven Standard, that evidence comes with every visit at no extra charge.
Lock Repair Pricing in Summerlin

We price lock work in writing, and we quote a range on the page so you know what to expect before you call. Here’s how the numbers break down:
| Lock repair item | Typical range |
|---|---|
| Latch and strike adjustment (realignment) | $95 – $165 |
| Lock cylinder replacement | $130 – $210 |
| Keypad repair or replacement (hardwired) | $150 – $260 |
| Electric lock / release mechanism repair | $140 – $230 |
| Low-voltage lock wiring repair | $110 – $200 |
| Manual release cable or lever repair | $100 – $180 |
What moves a job to the top of a range? A gate that has sagged and needs hinge work before the latch will line up. A keypad that needs new wiring run through the post. A strike embedded in brick or stone that has to be reset. A lock integrated with the operator’s control board, which takes longer to test and adjust. If the gate is a complicated slide gate with an electric lock tied into an access panel, the job runs higher. A simple latch realign on a residential swing gate runs at the bottom.
Two things make our pricing different. First, the price is written and handed over before we start, so there’s no “call for a quote” and no invoice that turns up a surprise line item. Second, if you’ve already got a written estimate from another company, bring it to us. We’ll review it at no cost and tell you honestly whether it’s fair.
Most Summerlin lock jobs are done same day. Some need a part ordered, and we’ll tell you that on the call rather than after we arrive.
FAQs – Lock Repair
How much does gate lock repair cost in Summerlin?
Gate lock repair in Summerlin typically runs $95 to $260, depending on whether the issue is a latch alignment, a cylinder, a keypad, or the lock wiring. A simple strike realignment sits at the low end; a keypad replacement with new wiring sits at the high end. Call (844) 797-2809 for an exact quote, and remember the price is written in advance.
Can you come the same day?
In most cases, yes. Lock repairs are common and we carry the parts that fail most often, including cylinders, latches, and release hardware. A live person answers the phone any hour, so if you’re locked out right now, call and we’ll tell you what’s possible before you hang up.
Should I repair the lock or replace the gate?
Repair the lock. A failed latch, cylinder, or keypad almost never means the gate needs replacing. The lock is the wear part. Replacing a gate over a $150 latch problem is a waste of money, and it isn’t a repair we’ll recommend. If we find structural problems with the gate itself, we’ll tell you and show you photos.
Do you work on my gate’s brand of operator?
Very likely. We service a wide range of operators, including LiftMaster, FAAC, BFT, and Mighty Mule, so we can repair the lock on the system already on your property rather than steering you toward replacement. Tell us the model on the call and we’ll confirm before we arrive.
Why Homeowners in Summerlin Call Us for Lock Work

A gate lock is a security component. If it isn’t right, the gate isn’t doing its job, and a half-working lock is worse than an honest one because it creates false confidence. We treat lock repairs the way we treat every gate repair: diagnose it properly, price it in writing, fix it, and leave documentation. If something we repaired fails, the 365-Day Done Right Promise covers it. We’ll come back, make it right, and there’s no argument, no fee, and no expiration inside that window. Homeowners across the city count on that standard, and so do the technicians we send: background-checked, uniformed, with a name and photo sent before arrival. For the bigger picture on what we handle beyond locks, the Gate Repair page lays it out.
The differentiator is paperwork. Most gate companies give you a verbal estimate and a handshake. We hand you a written scope, a written price, and a photo record of the visit, filed so the next person to touch your gate has a starting point instead of a guess. If you’ve had a lock repaired twice and it’s still acting up, that record is where the answer usually is. Bring the paperwork, or call us and we’ll come look.
Contact Us for Lock Repair in Summerlin
If a gate lock in Summerlin has stopped doing its job, call (844) 797-2809 for a free estimate. A live person answers 24 hours a day. We’ll ask the right questions, come out, diagnose the lock and the gate around it, write the price in hand, and leave you with a photo record when the work is done. No surprise invoices, no voicemail loop, no runaround about whether the gate needs a new lock or a whole new gate. Just the repair, done right, with the paperwork to prove it.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin.