Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Parts & Welding for Summerlin Homeowners
A gate that drags, sags, or won’t latch is usually a parts problem, not a whole-gate problem. In Summerlin, we see it most on older iron and steel swing gates where the hinges have worn oval and the post has started to lean, or on aluminum gates where a weld cracked after years of sun and temperature swing. Our technicians have up to 12 years of experience with gate hardware and welding, and we work on whatever make is already on your property instead of steering you toward a replacement. We name the failed part, photograph it, and write the price before anyone picks up a tool. Call (844) 797-2809 and a live person answers, day or night.
What Our Gate Parts & Welding Service Includes
Gate hardware fails in predictable places. The work below covers the six repairs we handle most in Summerlin, and each one is priced in writing before we start. If a repair turns out to need something else once we’re in it, we stop and show you the photo before we change the scope.
Hinge Replacement
Hinges carry the full weight of the gate leaf, and when the pin or barrel wears, the gate drops and starts dragging on the ground or the strike. You’ll notice it as a gate that scrapes, swings crooked, or won’t close flush. We cut out the worn hinge, weld or bolt in a replacement rated for the leaf weight, and check the gate swing through its full arc before we leave. On Summerlin gates with powder-coated finishes, we touch up the weld area so the repair doesn’t become a rust point.

Post Replacement
A gate post that has shifted out of plumb throws off the entire gate, no matter how good the hinges are. Posts fail from soil movement, root intrusion, or simply being set too shallow for the gate they carry. We pull the old post, set a new one at the correct depth and alignment, and re-hang the gate to the new post with the swing checked and photographed. In Summerlin’s caliche-heavy soil, the footing work matters as much as the post itself, so we set it right rather than patching around a lean.

Rail Repair
Rails are the horizontal bars that give the gate its structure, and a bent or cracked rail makes the whole leaf flex and bind. It shows up as a gate that racks sideways or a rail that has pulled away from the frame at the weld. We straighten or replace the damaged rail, re-weld it to the frame, and check the gate for square before it goes back into service. A rail repair done right keeps a small problem from becoming a full frame replacement.

Custom Welding
Some gates need a repair that no off-the-shelf part fits, like a broken decorative scroll, a cracked frame joint, or a custom bracket for a new motor. Custom welding means we fabricate or repair the metal to match what’s already there, in steel, iron, or aluminum, rather than forcing a universal part into a spot it doesn’t belong. We photograph the weld and note the material and finish so the next technician knows exactly what was done. This is the kind of work that keeps an older ornamental gate in service instead of sending it to the scrap pile.
Gate Rollers
Sliding gates ride on rollers or wheels, and when a roller wears flat or seizes, the gate jerks, grinds, or jumps the track. You’ll hear it before you see it, a scraping or thumping as the gate moves. We replace the worn rollers, check the track for debris and alignment, and adjust the gate so it rolls smooth through its full travel. Rollers are a small part with an outsized effect on how long the rest of the gate hardware lasts.
Latch & Lock
A latch that won’t catch or a lock that won’t turn is a security gap, not just an annoyance, and it’s often the first sign that the gate has shifted out of alignment. We replace worn latches, repair or swap lock hardware, and check that the gate closes and secures the way it should. If the latch problem traces back to a post or hinge issue, we fix the cause rather than adjusting the latch around a gate that’s out of square. Before we leave, you get a photo log of what was found and what was replaced.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Parts & Welding

Gate hardware shows up on all kinds of automation, and the parts that wear out are often tied to how a specific brand mounts and travels. We work on Mighty Mule operators and know their arm brackets and limit setups well enough to spot wear before it becomes a motor problem. LiftMaster and FAAC gates are common in Summerlin too, and on those we pay attention to how the hardware interacts with the operator arm so a parts repair doesn’t throw off the gate’s travel. An opener bracket that’s out of line will wear a hinge out faster than any gate should.
Whether you have Mighty Mule, LiftMaster, FAAC, BFT, or any other make, we can help. Our job is to fix the hardware on the gate you already own, not to talk you into a new operator because the brand is unfamiliar. We document the part number installed and leave that record with you, so if the gate ever needs service again, the next person starts with facts instead of guesses. That’s the same documentation habit we bring to every gate parts and welding visit in Summerlin.
Before
AfterSigns You Need Gate Parts & Welding Right Now
- The gate drags or scrapes the ground. This usually means a worn hinge or a post that has shifted, and left alone it grinds down the gate bottom and strains the operator. It’s a small fix now and a bigger one if the frame starts to bend.
- The gate sags or won’t close flush. A sagging gate is telling you the hinge or post is failing, and a gate that won’t latch is a security gap. We check the alignment before assuming it’s just the latch.
- You see a crack or rust at a weld joint. Cracks spread under the gate’s own weight, and rust at a weld means moisture has gotten into the joint. Both are worth a look before the joint fails completely.
- The gate jerks or jumps on its track. Flat or seized rollers cause this, and a gate that jumps the track can damage the operator or the gate frame. Rollers are inexpensive and worth replacing early.
- The latch won’t catch or the lock won’t turn. This is often the first sign the gate has shifted out of square, and it’s a security issue you don’t want to sit on. We find the cause, not just the symptom.
Our Gate Parts & Welding Process – Step by Step

- 1
We look at the whole gate, not just the broken part. Before we quote a hinge, we check the post for plumb, the frame for square, and the rollers and latch for wear. A hinge that failed because the post is leaning will fail again if we only replace the hinge.
- 2
We photograph what we find. Every failed part, every crack, every weld joint gets a photo, and we show you what we’re seeing. This is the documentation habit behind The Haven Standard, and it means the repair is based on evidence rather than a guess.
- 3
We write the price before any work starts. The flat price is handed over in writing, so you know the number before a tool comes out. Under Clause 1 of The Haven Standard (“Have it in writing”), that’s not optional on our jobs.
- 4
We do the repair and check the full gate swing. Hinge, post, rail, roller, or weld, we check the gate through its entire travel after the fix, not just at the point of repair. If the gate binds or the latch misses, we adjust before we call it done.
- 5
We leave you a photo record of the work. The photo log of what was found, what was set, and what was installed stays with you and goes into the job record. If the repair ever needs a second look, the next visit starts with facts.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Summerlin?
Gate hardware and welding in Summerlin generally runs from about $150 for a single worn roller or latch swap up to $900 or more for a post replacement with re-hanging, depending on the gate material and how much needs to come apart. A typical hinge replacement runs $180 – $320 per hinge depending on the leaf weight and whether the post needs adjustment at the same time. A rail repair or crack weld usually lands between $220 and $480, while custom welding on ornamental or out-of-production gates is priced after we see the joint. Post replacement is the larger job at $500 – $900, since the footing and re-hang are most of the work.
What affects the price most is the gate material, the number of parts involved, and whether the failure traces back to a post or frame problem. You avoid overpaying by getting the diagnosis right the first time, which is why we check the whole gate before quoting a single part. Every estimate is free and written, and the price is agreed before work starts, so there’s no surprise invoice at the end.
Gate Parts & Welding Near Summerlin – Our Service Area

We handle gate parts and welding across Summerlin and the surrounding valley, including Spring Valley, Las Vegas, Enterprise, and Winchester. For hardware and weld repairs we can often get to you the same day, and emergency calls are answered by a live person around the clock. If you’re outside the core Summerlin area, call and we’ll tell you honestly when we can be there.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Parts & Welding in Summerlin

Gate parts and welding covers the hardware and metalwork that keep a gate operating: hinges, posts, rails, rollers, latches, and locks, plus welding to repair cracks, joints, and custom brackets. It’s the repair work that keeps an existing gate in service rather than replacing it. In Summerlin, that often means fixing worn hinges or a leaning post on an older iron gate. Call (844) 797-2809 to describe the problem and get a written price.
Most single-part repairs, like a hinge or latch, are finished in an hour or two, while a post replacement or custom weld can take a half day or more depending on the gate. We’ll tell you the expected time when we write the estimate. If a repair needs a fabricated part, we let you know before we start.
Small hardware like rollers and latches runs about $150 – $250, hinge replacement is typically $180 – $320 per hinge, and post replacement with re-hanging runs $500 – $900. Custom welding is quoted after we see the joint. Every price is written and agreed before work starts. Call (844) 797-2809 for an exact quote, free of charge.
Yes, we service Mighty Mule, LiftMaster, FAAC, BFT, and other makes, and we work on the hardware and welding regardless of which operator is on the gate. We’re not a dealer for any brand, so we fix what’s there instead of steering you toward a replacement. Call and tell us the brand and the symptom, and we’ll tell you what we can do.
Yes, we handle emergency hardware calls in Summerlin, and a live person answers the phone 24 hours a day, seven days a week. If a gate won’t latch, a hinge has failed, or a post is unsafe, call (844) 797-2809 and we’ll get someone out as soon as we can. No voicemail loop, no callback queue.
Every completed repair is covered by the 365-Day Done Right Promise, which gives one full year for us to make any repair right at no additional charge. There’s no argument and no fee within that window. If something we fixed isn’t right, we come back and correct it.
Clear the area around the gate so we can check the full swing, and if you have any past repair records or a written estimate from another company, have them ready. We offer a free second opinion on another company’s written estimate, and we’ll review the paperwork at no cost. Then just be available to walk the gate with us when we arrive.
Schedule Your Gate Parts & Welding Service in Summerlin Today
If your gate is dragging, sagging, or showing a crack at a weld, we can look at it and give you a written price before any work starts. Call (844) 797-2809 for a free, no-obligation estimate, and a live person will answer any hour of the day. We bring the parts, the documentation, and the 365-Day Done Right Promise to every Summerlin job. For a broader view of our gate work, start at our home page.
Written by the team at Vance Gate Repair.