Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterAutomatic Gate Repair Cost in Summerlin, NV: Two Estimates, Not One
Automatic gate repair in Summerlin typically runs $185 to $420 for mechanical fixes - motor, limit switches, hinges, wiring - and adds $180 to $650 if the gate also needs finish and geometry restored to stay inside HOA architectural guidelines. Those are two separate line items, and most verbal quotes leave the second one out. Call (844) 797-2809 and we’ll hand you a written, itemized price before anyone touches the gate.
The quote your neighbor got was probably incomplete. It covered the arm, the motor, maybe a hinge. It didn’t mention re-matching the powder-coat color to the HOA-approved palette, and his architectural review board noticed. In Summerlin, that oversight can cost more than the repair did.
Key Takeaways
- Budget $185-$420 for the mechanical fix and $180-$650 for HOA-compliant finish and alignment work.
- A $150 hinge adjustment can turn into a $600+ post-footing re-set once we confirm the post has heaved in caliche or fill soil.
- We service nine automation brands, so we quote the real price for the motor you already have.
- Our 365-Day Done Right Promise is built into the flat rate - no return-visit surcharge.
- You get the written price before work starts and a photo record when we leave.
Why the Summerlin Quote You Got Didn’t Add Up
Summerlin was built largely from the 1990s onward as a master-planned, HOA-governed community. That matters for a driveway gate in a way it doesn’t in older, non-HOA parts of Las Vegas. The gate’s finish color, its swing or slide geometry, and even the style of hinge hardware are usually dictated by architectural guidelines rather than by you alone. When a repair touches any visible surface, the finished gate has to match the approved design or you’re looking at a violation notice.
In enclaves like The Ridges and Red Rock Country Club, we regularly see a mechanical fix done well and then flagged anyway - because the technician replaced a hinge in satin black when the approved palette called for a bronze tone, or because the gate rehung two degrees off and no longer lined up with the pedestrian gate beside it. The repair was fine. The restoration wasn’t done. Two different bills, and only one of them showed up on the original estimate.
Under The Haven Standard, the written price we hand over before any work begins breaks both buckets out separately. You see the mechanical number and the finish-and-geometry number side by side, so you know exactly which bill you’re facing before you approve anything.
What Each Cost Bucket Actually Covers

Here’s how the two estimates break down in dollars. Every row below is a line item on the written quote, not a surprise.
| Line Item | Typical Cost Range |
|---|---|
| Limit switch reset or replacement | $120 - $260 |
| Hinge replacement / arm adjustment | $150 - $300 |
| Wiring repair (photo-eye, control, safety loop) | $185 - $420 |
| Motor or control board repair | $275 - $650 |
| Powder-coat color re-match to HOA palette | $180 - $450 |
| Gate rehung / geometry corrected to align with approved design | $180 - $650 |
| Post-footing re-set (heaved or settled post, caliche/fill) | $600 - $1,400+ |
Two of those rows deserve attention on any Summerlin job. The first is the finish re-match: desert sun and 100°F-plus summers bake and fade powder-coat, so a repaired section that isn’t color-corrected stands out under the HOA’s eye in a way the original fade didn’t. The second is the post-footing re-set. Summerlin lots sit on fill and caliche-laden soil, and expansive clay moves. A gate that “just needs adjusting” often turns out to have a heaving post footing that has to be re-set, not re-hung. That’s the row where a $150 hinge adjustment becomes a $600+ job - and it’s why we confirm the post before anyone starts digging.
Before
AfterHow Motor Brand Changes Your Parts Cost
The motor on your property sets the parts price, and knowing which one it is before we arrive changes what we can quote. We work on nine automation brands - LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule - so we’re not steering you toward a replacement because we don’t know your unit. A LiftMaster board swap costs differently than a FAAC actuator rebuild, and a Ghost Controls arm on a residential swing gate prices differently again.
When you call, tell us the make and model if it’s legible on the housing. If it isn’t, we work it out from photographs. Either way, we arrive with the correct part so the price on the written quote is the price that holds. You won’t get a second number once the panel comes off.
What Our Written Flat Price Includes

The price you see is the price you pay. Here’s what sits inside it, line by line, so you can hold it next to a verbal estimate and see what’s missing from theirs.
- The diagnosis, in writing. What we found, what it does, and what it will take to correct.
- The mechanical repair - parts and labor, itemized, with the brand and part number named.
- The finish-and-geometry restoration where HOA guidelines require it, quoted as its own line so you can see it wasn’t folded in to inflate the mechanical number.
- The 365-Day Done Right Promise, built into the flat rate. If the repair isn’t right, we make it right - no argument, no fee, no expiration inside that window.
- The photo record under Clause 4 (Evidence on every job): what was found, what was adjusted, what was installed, left with you and filed in the job record.
Compare that to a verbal estimate with one number and no breakdown. The difference isn’t just paperwork; it’s knowing whether your quote covers the color re-match or leaves you holding the violation. If you already have a written estimate from another company, we’ll review it at no cost as a free second opinion. Bring the paperwork. Our technicians have up to 12 years of experience reading exactly what those documents leave out.
Common Summerlin Scenarios We Price Every Week
The westward wind gate. Monsoon dust storms and the west-side wind routinely blow gates out of alignment and snap closer or operator arms. Sometimes it’s an adjustment. Sometimes the wind found a post that was already settling. We confirm which before we quote.
The faded finish. A gate repaired mechanically but not color-matched gets flagged by the architectural review board within a season. We quote the color re-match as its own line so it doesn’t go missing.
The “it just needs adjusting.” A hinged pedestrian gate that drags or a slide gate that binds. Occasionally it’s a $150 hinge adjustment. Frequently in Summerlin it’s a post that has heaved in the fill soil underneath, and that’s the $600+ row. We tell you which one you have, in writing, before we dig.
If you want the broader picture of what we handle day to day, our Gate Repair page covers the full range of mechanical and electrical work, and you can see everything we do across the valley at our Gate Repair in Summerlin page and the home page.
How We Get You a Written Price

- Call (844) 797-2809. A live person answers any hour, every day. No voicemail, no callback queue.
- Describe the gate and the symptom. Brand, model if you have it, and what it’s doing - or not doing.
- We quote in writing before work starts. Mechanical and finish-and-geometry broken out separately, with the part numbers named.
- We confirm the post if the symptom suggests it. That determination happens before digging, and it’s what protects you from a mid-job surprise.
- We complete the work and leave documentation. A photographed record of every adjustment and a written record of the part installed.
Two techs, a written scope, and a document trail - the same habit we carried over from commercial access-control work, applied to every residential driveway gate in Summerlin.
FAQs
Most automatic gate repairs in Summerlin run $185 to $420 for the mechanical fix, plus $180 to $650 if the gate also needs HOA-required finish or geometry restoration. A post-footing re-set, if the post has heaved in caliche or fill soil, adds $600 to $1,400 or more. Call (844) 797-2809 for a written, itemized price before work starts - estimates are free.
Skipping it risks an architectural violation fine that can cost more than the repair itself. Summerlin’s HOA-governed communities require visible repairs to match the approved palette and geometry, and a color-mismatched hinge or rehung gate gets flagged. It’s quoted as its own line on our written price so you can see the cost and decide before work begins. Call us for an exact figure.
For most Summerlin driveway and pedestrian gates, repair is cheaper - a motor or control board repair at $275 to $650 beats a full replacement, and because we service nine automation brands we’re not pushing you toward a new unit. We quote the repair first and only discuss replacement if the gate frame or motor itself is structurally past saving. Call (844) 797-2809 and we’ll tell you which situation you’re in.
Yes. A live person answers the phone any hour of any day - no voicemail, no callback window - so we can get a technician out the same day in most Summerlin cases. Have the gate’s brand and model ready if you can read them off the housing; it lets us arrive with the correct part and quote the real price. Call (844) 797-2809.
Get Your Written Price Before Anyone Picks Up a Tool

You shouldn’t have to guess which bill you’re facing. Call (844) 797-2809 and we’ll hand you a written, itemized price - mechanical and finish-and-geometry broken out separately - before any work begins. Insured, licensed, live person any hour, and a free second opinion on any other estimate you bring us. Estimates are free.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin, NV.
What Our Customers Say
"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.