Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Sunrise Manor
If your driveway gate is dragging, hanging crooked, or the operator quit sometime last summer, you’re in the right place. Sunrise Manor is home to some of the oldest residential gate stock in the east Las Vegas Valley, and that shapes how repairs here actually work. We know the 89110 streets, the block-wall frontages, and the way posts settle in this soil. When you call, a live person answers at (844) 797-2809, day or night. We’ll tell you what a repair likely involves, then send a background-checked technician who arrives with a photo record in hand and hands you a written price before touching a tool.

Why Vance Gate Repair Summerlin Is Sunrise Manor’s Preferred Gate Repair Company
Most of the gates we’re called to in Sunrise Manor are 30 to 50 years old. That means the average repair isn’t a parts swap; it’s a judgment call about what’s worth saving. Our technicians have up to 12 years of experience with exactly this kind of work, and they document each visit the way we’ve documented jobs since 2014: photos of the failed weld, the reading on the limit switch, the part number on the replacement. If you bring us a written estimate from another gate company, we’ll review it at no charge for a second opinion.
We price in writing before work starts, and completed work is covered by the 365-Day Done Right Promise. Sunrise Manor and the surrounding valley are part of our regular service area, so we can often reach you the same day for time-sensitive repairs. Every job leaves you with a photo log of what we found, what we adjusted, and what we installed.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Sunrise Manor

Electric Gate Repair
The desert heat is hard on outdoor electronics, and gate operators installed without shade take the worst of it. Summer temperatures over 100°F can cook a control board, fry a transformer, or warp a housing that once fit cleanly. When an electric gate stops responding in Sunrise Manor, we start with the board and the motor separately, not the whole unit, so you’re not charged for a replacement when a component fix will hold.
Automatic Gate Repair
Automatic swing and slide gates around Sunrise Manor tend to be a mix of newer motors bolted onto much older gates. When the automation falters, the underlying problem is often the gate itself: a sagging hinge, a bent track, a post that has shifted. We diagnose the gate and the operator together, then document what’s driving the fault. If your operator is a DoorKing or Mighty Mule and only the arm bracket is failing, we’ll tell you that in the written estimate instead of quoting a full replacement.
Hinge & Post Repair
This is the most common repair in Sunrise Manor and the one most often misdiagnosed. Expansive shrink-swell clay under 30- to 50-year-old post footings swells in the wet season and contracts in the dry, gradually lifting, leaning, or twisting the hinge post. Re-plumbing and re-setting that footing is usually the real repair, not swapping heavier hinges onto a post that has moved. We’ll tell you which of the two you’re dealing with.
Gate Realignment
When a gate drags on the concrete or scrapes the strike post, a simple realignment often restores years of clean operation. On older east-side tract properties, the realignment work usually starts at the post and works back to the gate panel. We check the frame for twist, confirm the latch alignment, and photograph each adjustment so the next technician knows exactly what was set and why.
Before
AfterTrusted Brands We Service in Sunrise Manor
We work on the operator that’s already on your property, whichever one it is. That includes LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – nine brands in total. For older gates in Sunrise Manor, that range matters, because a mid-80s or 90s install often means a legacy board that’s been discontinued. We source compatible replacement parts when they exist and guide you honestly when a retrofit makes more sense. We don’t stock parts on trucks or in a local warehouse; parts are ordered to the job.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Sunrise Manor Homes

- Hinge posts leaning or lifting. The expansive clay beneath 1970s through 1990s footings swells and shrinks across seasons, moving the post and causing the gate to drag or bind instead of swinging free. It reads as a hinge failure but is almost always a footing problem.
- Rusted welds at the corners. Decades of 100°F-plus summers crack and thin the original wrought-iron and chain-link welds at frame corners and hinge mounts. A gate can look structurally sound while the welds are already failing.
- Dead or dying operator boards. Older control boards fail in the heat, and many legacy boards are discontinued. Retrofitting a control system is usually cheaper than replacing the whole operator.
- Missing safety photo-eyes. Gates installed before modern entrapment rules often lack working photocells. The infrared beam that stops the gate when something crosses its path is a small part with real consequences when it’s absent.
Pricing for Gate Repair in Sunrise Manor, NV
Most hinge and post repairs in Sunrise Manor run $250 to $650, and gate realignment typically lands between $150 and $350. Weld and rust repair on an original wrought-iron gate usually falls in the $200 to $500 range, while replacing a dead operator board or retrofitting a legacy control system starts around $350 and can reach $900 for a more involved job. New swing-gate motor replacements typically run $850 to $1,800, depending on the brand and whether the arm bracket is intact. How much you pay depends on post condition, weld integrity, and whether your gate predates modern photo-eye standards. We write the price and hand it to you before any work begins. Estimates are free.
We Also Serve Cities Near Sunrise Manor

Our gate repair work reaches across the east valley and beyond. If you’re in Whitney, Winchester, Las Vegas, or North Las Vegas, the same written-price and documented-visit standards apply. You can learn more about the full scope of our Gate Repair services or see our dedicated Gate Repair in Sunrise Manor page for additional local details.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Sunrise Manor

In most Sunrise Manor cases, it’s the post. The expansive clay under decades-old footings shifts the post, causing the gate to sag and drag. A qualified technician checks the post and footing first, not the hinges. Call (844) 797-2809 for a free written estimate.
Often, yes. Many legacy operators in Sunrise Manor can be retrofitted with a compatible control board or updated arm assembly at a fraction of replacement cost. Whether yours qualifies depends on the condition of the motor and the existing wiring. Bring the paperwork from any prior repair for a free second opinion, or call (844) 797-2809 to schedule a diagnostic.
Yes. Any automatic gate installed before the UL 325 entrapment rules should be evaluated for working photo-eyes, because a gate that can’t sense an obstruction is a genuine hazard. We check for a functioning photocell on every automatic gate we service in Sunrise Manor. Call (844) 797-2809 to schedule a safety check.
The shrink-swell clay common under older east-side tract homes expands when wet and contracts when dry, gradually lifting or leaning the post. In Sunrise Manor, that soil movement shows up at the hinge post long before it affects anything else on the property. Call us and we’ll confirm whether yours is a footing issue or something simpler.
For most Sunrise Manor gates still on solid posts, repair is cheaper. A re-set footing, sag correction, and re-weld to the original frame often costs $600 to $1,200 total, well below a full replacement. Replacement becomes the better answer when the frame itself is bent or rusted through at multiple points. Call (844) 797-2809 for a free written comparison.
Whether your gate is a 1984 wrought-iron driveway panel that needs its post re-set or a newer operator that quit in July, we’ll show you what we found and put the price in writing before any work starts. To schedule a visit anywhere in Sunrise Manor or the surrounding valley, call (844) 797-2809. Estimates are free.
Written by the team at Vance Gate Repair Summerlin.