A Vance company - serving Summerlin, NV
Gate Repair in Whitney, NV | Vance Gate Repair Summerlin

Gate Repair in Whitney - On-Site in 60 Minutes, Fixed the Same Day

Most gate faults are diagnosed and fixed on the first visit. You get the price before we start, and the gate is left working and safe before we leave.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Fast, Reliable Gate Repair Across Whitney

A sticking driveway gate is usually a hinge, a post footing, or a tired control board, and most of the gates we open in Whitney are one of those three. Every repair begins with a written price in your hands before a tool comes out, and it ends with a photo record of what we found, what we adjusted, and what we installed. Whitney’s mix of 1970s-to-1990s tract homes near the flood-control wash and the desert edge means we spend as much time on rusted posts and out-of-square frames as on operators. Call (844) 797-2809 and a live person answers, any hour.

professional gate repair service in Whitney, NV

Call (844) 797-2809

Why Vance Gate Repair Summerlin Is Whitney’s Preferred Gate Repair Company

We’ve repaired and installed more than 22,000 gates since 2014, and every one of those jobs left the homeowner with a written price before work started and a documented record when the technician left. In Whitney, that habit matters because so many gates here are original builder-grade hardware now 25 to 40 years old – the kind of work where a photo of the limit-switch setting saves the next technician an hour of guesswork.

Our technicians have up to 12 years of experience, and they arrive background-checked with a name and photo sent before they reach the driveway. Whitney sits inside ZIP code 89122, and our crews know the difference between a gate on a Whitney lot and one a mile east in Henderson. If another company has already handed you a written estimate, bring it and we’ll review it at no charge as a free second opinion.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Gate Repair Services in Whitney

Technician performing professional gate hardware installation and repair
Our Gate Repair Services in Whitney

Electric Gate Repair

Electric gate repair in Whitney starts with the control panel, not the operator housing. Many of these gates run 1990s LiftMaster or Linear boards that no longer accept a modern safety photocell, so we test the board, the photo-eye beam, and the wiring before recommending anything. If the board is dead and obsolete, we tell you that plainly and price the retrofit in writing.

Automatic Gate Repair

Automatic gate repair covers the motor, arm, and every safety device that keeps the gate from closing on a person or a car. We service Viking and Ghost Controls units as readily as older brands, and each visit ends with a documented reading of where the limit switches sit. A gate that reverses for no reason is often a misaligned photo-eye, not a failing motor.

Hinge & Post Repair

Hinge and post repair is the most common job we run in Whitney. Blowing sand and flash-flood debris along the wash edge undermine post footings, which lets a swing gate sag until the hinges seize. We reset the post, correct the footing, and photograph the new hinge position so you can see exactly what changed.

Gate Realignment

Gate realignment handles slide gates that bind in the track or jam against the rack and pinion. Summer ground movement and monsoon wind gusts push a Whitney gate out of square faster than most homeowners expect. We true the frame and adjust the track, then document the alignment before we leave.

Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 797-2809

BeforeBefore
AfterAfter

Trusted Brands We Service in Whitney

We work on nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t keep parts on a truck and we don’t steer you toward a replacement when a repair will do. If your operator is a DoorKing or an older Elite, we can diagnose it and order the right part rather than telling you the whole system is obsolete. Turnaround is quick because we’ve already worked on most of the hardware in Whitney.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Gate Repair Problems We See in Whitney Homes

professional gate repair service
Common Gate Repair Problems We See in Whitney Homes

The pattern in Whitney is different from newer subdivisions because the gates themselves are older and the ground moves:

professional repairing a decorative stone gate pillar with sealant in Whitney, NV
  • Obsolete 1980s and 1990s control boards in builder-grade operators that won’t accept a modern safety photocell or keypad upgrade. The board fails quietly, and the homeowner assumes the whole motor is gone.
  • Hinge posts and footings undermined by blowing sand and debris from the wash, which lets a swing gate drop and seize at the hinge. Tightening the hinge never fixes this – the post itself has moved.
  • Summer shrink-swell movement and monsoon gusts knocking slide gates out of alignment, jamming the track. The gate runs fine in calm weather and binds the moment the wind picks up.
  • Rust on original wrought-iron and aluminum gates from extreme UV and dry desert air, which eats the weld at the hinge plate before it shows anywhere else.
Get the price in writing before anything starts.Serving Whitney - a real person answers, day or night.
Call now

Pricing for Gate Repair in Whitney, NV

Most hinge and post repairs in Whitney run $275 to $650, depending on whether the footing needs resetting. Electric and automatic gate repairs – control board replacement, photo-eye alignment, limit-switch adjustment – typically land between $195 and $720, with board replacements on the higher end. Gate realignment for a binding slide gate generally runs $185 to $380. A full operator retrofit onto an existing frame is a bigger number and we price it in writing after we’ve seen the post and the panel. Every quote is agreed with you before any work starts, so the invoice never surprises you. Estimates are free.

We Also Serve Cities Near Whitney

professional repairing a decorative stone gate pillar with sealant
We Also Serve Cities Near Whitney

Whitney borders Sunrise Manor to the north and Winchester to the west, and we also cover Paradise and Las Vegas. If you’re just across the line, our Gate Repair team works those addresses too. You can read more about how we handle Gate Repair in Whitney and nearby communities on our city page.

Serving Whitney, NV – Our Local Coverage Area

We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – Gate Repair in Whitney

Two professional technicians installing a decorative metal security gate
FAQs – Gate Repair in Whitney

Why Whitney Chooses Vance Gate Repair Summerlin

We set the standard for gate repair in Whitney.

30-60 Min Response

Fast dispatch across Whitney. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Whitney

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Whitney - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within the hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Whitney Customers Say

Trusted by homeowners across Whitney and surrounding areas.

★★★★★

"Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."

Camille R.
★★★★★

"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."

Douglas N.
★★★★★

"Good work on a long driveway gate. Arrived when they said, finished when they said."

Sofia E.

Ready for Gate Repair in Whitney?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Whitney.

(844) 797-2809

Request a Free Estimate in Whitney

Tell us about your gate repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch