Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Boulder City
If your gate has started to drag, won’t latch, or the operator has gone dark, you’re probably standing in the driveway looking at hardware that’s older than the street itself. We work on a lot of that hardware in Boulder City. From the 1930s bungalow blocks in the 89005 ZIP to the newer subdivisions out toward the edges of town, we send background-checked technicians who know the difference between a modern steel hinge post and a piece of federal-era masonry that needs re-anchoring. Call (844) 797-2809 and a live person picks up, day or night.

Why Vance Gate Repair Summerlin Is Boulder City’s Preferred Gate Parts & Welding Company
Our gate parts and welding work in Boulder City carries the same habit we built on commercial access-control sites: every visit leaves a record. That means a written price before anyone picks up a tool, and a photo log of what we found, what we adjusted, and what we replaced, handed to you before we leave. Under The Haven Standard, that documentation is included on every job at no extra charge.
Boulder City homeowners tend to research before they call, and we plan for that. Our technicians have up to 12 years of experience, and because we service nine major automation brands, we can work on whatever motor is already on your property instead of steering you toward a replacement. If you’ve got a written estimate from another company, bring it. Under our free second-opinion offer, we’ll review the paperwork and tell you honestly whether the scope makes sense.
We cover both ZIP codes in Boulder City, 89006 and 89005, and our response across the historic core and the outer subdivisions is the same. Every repair is backed by the 365-Day Done Right Promise: if it isn’t right, we make it right within that year, no argument and no fee.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Boulder City

Hinge Replacement
In Boulder City’s older blocks, a failing hinge rarely fails alone. The hinge pulls loose because the stone or concrete pier it’s bolted to has shifted or spalled, so the real fix starts with sound masonry anchoring. We photograph the old hinge position, note the pier condition, and set new hardware in a way that will hold through another summer.

Custom Welding
Original wrought-iron gates in Boulder City’s historic core often need a specific repair, not a generic part. We weld to match what’s there: a cracked picket, a split scroll, a bracket that no longer lines up. Custom welding is also where gate replacement gets avoided, since Historic District design review makes a like-for-like repair the faster path.

Latch & Lock
A gate that won’t latch is often misdiagnosed as a hinge problem. On Boulder City’s older pedestrian gates, a latch that misses its strike is usually telling you the gate has dropped slightly on a settled pier. We measure the gap, reset the latch, and test the lock action before we consider the job done.

Post Replacement
Driveway gates on the newer edges of Boulder City tend to sit on shallow-set steel posts that have worked loose in the caliche soil. When a post can’t be saved, we set a fresh footing and document the depth and the anchor type so the next technician isn’t guessing. Rail repair and gate rollers often come into the same visit.
Before
AfterTrusted Brands We Service in Boulder City
We work on the automation already on the property. That includes Viking and Ghost Controls units common on residential swing gates, and DoorKing and Elite operators found on light commercial entries around Boulder City. We don’t claim to stock parts locally, but the diagnostic step is where we save you time: we identify the actual failure and give you a written price for the fix before any work starts. Because our technicians work across all nine major brands, you’re not pushed toward a replacement motor just because the one you have isn’t ours to sell.
Common Gate Parts & Welding Problems We See in Boulder City Homes

- Hinges pulling out of 1930s masonry piers. In the historic core, gates hung on the original stone and concrete piers have shifted as the piers settle and spall, so the hinge gives way before the gate panel does. Shimming the latch tends to fail again within a season; re-anchoring into sound masonry is what lasts.
- Rust and check on original wrought-iron and wood. Boulder City’s intense summer heat and low humidity dry and check old wood, and monsoon moisture rusts original iron at the welds first. Winter nights that dip below freezing cycle the hinges and posts, which is why older hardware fails at the pivot rather than mid-panel.
- Legacy operators with obsolete control boards. Many older automatic gates still run on control boards that are no longer stocked, and their safety photocells and keypad hardware have aged out of support. That’s a repair-or-replace decision we walk through honestly rather than assuming the motor is the answer.
- Sagging on shallow-set steel posts in caliche. Newer subdivision gates on the edges of town often sag because the post footing has worked loose in caliche soil, not because the panel is bent. Rail repair and a fresh footing usually fix it.
The Historic Core: What Can Be Repaired and What Can’t
Boulder City was built as a federal company town for Hoover Dam, and that history is still standing. Most homes in the old core, especially in the 89005 ZIP, date to the 1930s and 40s, with original wrought-iron pedestrian gates and wood pickets set in masonry piers. The piers were placed by the federal government. They’re not modern steel posts, and a hinge job here starts with the masonry, not the metal.
Because the old core sits under Historic District design review for exterior changes, like-for-like repair of those original gates is typically faster to approve than replacement. That changes the answer on a lot of jobs. A gate that looks beyond saving in another city may be a straightforward re-anchor and weld here, and a full replacement that would fail review may never need to be proposed at all. We plan every Boulder City historic-core repair with that in mind.

Here’s how a typical job in those older bungalow blocks tends to go. A wood or wrought-iron pedestrian gate starts to drag or won’t latch after decades on a masonry pier that has shifted a little in the caliche soil. If the correction only bends the hinge or shims the latch, it usually fails again within a season. The durable fix re-anchors the hardware into sound masonry and, where the operator is older, adds current safety photocells. Driveway gates on the newer edges of town more often need rail repair, hinge replacement, or a fresh post footing after heat, monsoon moisture, and winter-night temperature swings work the metal loose.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Boulder City, NV

We quote in writing before any work starts, so the number you’re given is the number you pay. For a reference, a typical hinge replacement on a masonry pier in Boulder City runs $180 – $360, and a re-anchor into sound stone or concrete at the higher end of that range. Latch and lock repair usually runs $95 – $220. Custom welding to match original ironwork runs $150 – $450 depending on the number of repair points. Post replacement with a fresh footing on a driveway gate runs $350 – $850. Rail repair and roller replacement typically run $120 – $300.
What moves a price is the condition of what’s underneath the gate: a spalled pier adds anchoring time, and a legacy operator may add a safety-photocell visit. Estimates on gate parts and welding in Boulder City are free, and the price is agreed before we start.
Legacy Operators: Retrofit or Replace?
Not every old operator needs replacing, and not every old operator can be saved. If the control board is obsolete and the entrapment-protection hardware is no longer stocked, we tell you that plainly and lay out both paths in writing. A retrofit that reuses a working motor with current safety photocells is often the cheaper answer, and it’s the one we’ll propose when the motor is sound. When the board itself is the problem and the parts aren’t available, we say so instead of chasing a repair that won’t hold. The decision comes down to what we can document, not what we’d prefer to sell.
We Also Serve Cities Near Boulder City

Our gate parts and welding work covers Boulder City and the surrounding communities, including Henderson, Whitney, Paradise, and Enterprise. If you’re near the Boulder City line and want a written price before anyone commits, we’ll come out and document what we find. See our Gate Parts & Welding service page for the full scope, or start with Gate Parts & Welding in Boulder City to see how we handle local jobs.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Boulder City

Yes, it can usually be repaired. The hinge failed because the masonry it’s bolted to has shifted or spalled, so the fix re-anchors new hardware into sound stone or concrete rather than bending the hinge back. In most cases that’s the durable repair, and it’s faster to approve under Historic District design review than a replacement. Call (844) 797-2809 for a free written estimate.
It depends on whether the motor and gearbox are still sound. If they are, a retrofit that keeps the working motor and brings the safety hardware current is often the cheaper path. If the board is the problem and the parts aren’t available, replacement is the honest answer, and we’ll say so in writing. Call (844) 797-2809 and we’ll document both options before you decide.
Yes. An older automatic gate without working entrapment protection is a genuine safety hazard, and the photocell (the infrared beam that stops and reverses the gate if something crosses the path) is the standard fix. We install and align current photocells and verify the reverse behavior before we leave. Call (844) 797-2809 to schedule a safety check.
The problem is usually at the pivot or the post, not the panel. On Boulder City’s newer subdivisions, a sagging driveway gate most often sits on a shallow-set steel post that has worked loose in the caliche soil, or on a hinge that’s worn at the pin. We measure the post and the hinge, document the reading, and fix the actual cause rather than shimming the gate. Call (844) 797-2809 for a free estimate.
Yes, in most cases. Original wood gates on Boulder City bungalows can be repaired with matching ironwork and like-for-like hardware, and custom welding is how we reproduce the original brackets and scrollwork. That approach also fits Historic District design review better than a replacement. Call (844) 797-2809 and we’ll document what’s repairable first.
Call for a Free Estimate on Gate Parts & Welding in Boulder City
Whether it’s a hinge pulling out of a 1930s pier or a legacy operator that needs a straight answer on retrofit versus replacement, we’ll come out, document what we find, and hand you a written price before any work starts. A live person answers the phone 24 hours a day at (844) 797-2809. Estimates are free, and the price is agreed before anyone picks up a tool.
Written by the team at Vance Gate Repair Summerlin.
