Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Henderson
A gate that drags, won’t latch, or jumps the track is a security problem before it’s a hardware problem, and in Henderson it usually comes with a second layer: the subdivision has an opinion about how the repair looks. We work on driveway gates, wall-and-pillar entry systems, and steel-framed slide gates throughout Henderson, and we price the job in writing before anyone picks up a tool. You’ll get a written scope and a written price up front, plus a photo record of what we found, what we set, and what we installed. Call (844) 797-2809 for a free estimate on your Henderson gate.

Why Vance Gate Repair Summerlin Is Henderson’s Preferred Gate Parts & Welding Company
Henderson homeowners tend to call after they’ve already read a few pages and checked a few reviews. They want the number visible before they commit, and that’s how we’ve built our local reputation here: a written price before work begins, no “call for a quote” runaround, and a documented photo record that stays with the house.
Our technicians have up to 12 years of experience, and every job is covered by our 365-Day Done Right Promise – a full year for us to make any repair right at no additional charge. We service nine major gate-automation brands, so we work on the motor already on your property instead of steering you toward a replacement you don’t need. A live person answers the phone 24 hours a day, seven days a week – no voicemail loop, no callback queue.
We also know Henderson’s approval layer. In Green Valley, Anthem, Seven Hills, and the older Water Street corridor, the association’s architectural standard sits on top of Clark County’s gate-height and setback rules, so a repair quote often gets reviewed by two authorities before a homeowner signs off. We build the job around that reality instead of discovering it halfway through.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Henderson

Hinge Replacement in Henderson
When a swing gate sags and drags but the rails look straight, the failure is often at the hinge itself – worn barrels, bent straps, or a plate pulled loose from the post. We replace gate hinges and hinge plates, then re-hang the gate and confirm the opener’s travel and safety photocell still trip correctly. On wall-and-pillar gates common to Green Valley subdivisions, we match the replacement hardware to the original finish so the panel still meets the association’s look.

Post Replacement in Henderson
A loose hinge post is the most common reason a Henderson drive gate won’t stay true, and it’s rarely a hinge problem. Shallow Desert-era concrete footings work loose through the freeze-thaw swing between cold winter nights and warm days, and caliche-hardened soil makes re-setting a post slower than it looks. We inspect the footing before touching the panel, then re-set or reinforce the post so the gate hangs square again.

Rail Repair in Henderson
Monsoon wind and dust storms bend older single-piece slide gates and unseat roller guides that were never lubricated, and rails take the punishment. We straighten bent rails, replace roller guides and gate rollers, and re-track the gate so it rolls clean instead of grinding. Where a rail is too far gone to reshape, we fabricate and fit a replacement run to the same dimensions.

Custom Welding in Henderson
Custom welding covers the work a parts catalog can’t fix: cracked pillar caps, bent frames, broken hinge brackets, and modified panels that need to match an approved design. We weld on site in Henderson where it’s practical, confirm the finish matches the subdivision’s spec, and photograph the repair before we leave. If a panel change crosses the County’s height or setback rule, we flag it before the work starts, not after.
Before
AfterTrusted Brands We Service in Henderson
We work on nine major gate-automation brands, including LiftMaster, FAAC, BFT, and Mighty Mule, so whatever motor is already mounted to your Henderson gate, we can service it rather than talk you into replacing it. We don’t claim to stock parts locally – parts are ordered for the job and the written price reflects the actual part number we’re installing. That keeps the turnaround honest, and it means the hinge, roller, or control board on your gate is matched to the brand and model we find on site.

Common Gate Parts & Welding Problems We See in Henderson Homes

- A hinge post loosened in shallow Desert-era footings. The winter freeze-thaw swing works the post loose, so the swing gate sags and drags even though the rails and hinges look intact. The fix starts at the footing, not the hinge.
- Roller guides unseated by monsoon wind and dust. Older single-piece slide gates that were never lubricated jump the track the week after the first big dust event, and the spring call surge is almost always “my gate came off the rail.”
- Baked operators and control boards. The Mojave summer routinely hits 105-115°F, which cooks motor windings and control boards on gates that are already at or past their 15-20 year service life.
- A repair that meets the HOA spec but ignores the County rule. A hinge post or panel change that satisfies the subdivision’s style, height, and finish standard can still get flagged after installation if nobody checked Clark County’s setback and height requirements first.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Parts & Welding in Henderson, NV
Henderson pricing runs in a predictable band. A typical hinge replacement in Henderson runs $150-$320 per hinge set, depending on hardware and finish. Hinge post re-setting and reinforcement usually lands between $350-$800, and caliche-hardened soil can push that to the top of the range. Rail repair and roller-guide replacement run $180-$450, while custom welding on cracked frames or brackets typically comes in at $225-$600 depending on scope. A latch and lock replacement runs $120-$280.
The written price is handed over and agreed before any work starts. If the panel needs an HOA or County approval step, we tell you before we quote so the number you sign is the number you pay. Estimates are free.
We Also Serve Cities Near Henderson

We work gates in the communities around Henderson too – Boulder City, Whitney, Paradise, and Enterprise – so if you’re just past the Henderson line, we can help. For the broader picture of what we do, see our Gate Parts & Welding hub, and for local coverage see Gate Parts & Welding in Henderson.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Henderson

Often yes. In Henderson’s master-planned neighborhoods, a hinge post or panel change that affects style, height, or finish usually needs the subdivision’s architectural approval, and it’s reviewed alongside Clark County’s gate-height and setback rules. We write the scope so you can submit it for approval before we start. Call (844) 797-2809 and we’ll walk through what your association needs.
The hinge post is usually the real problem, not the hinge. Shallow Desert-era concrete footings work loose through the freeze-thaw swing, so a new hinge bolted to a moving post will still let the gate sag. A qualified welder inspects the footing and re-sets or reinforces the post before re-hanging the panel. Call (844) 797-2809 for a free estimate.
Yes, it’s the most common spring call in Henderson. Monsoon wind and dust unseat roller guides on older single-piece slide gates that were never lubricated, and the gate drops off the rail. We replace the guides, re-track the gate, and check that the operator’s safety photocell still trips. Call (844) 797-2809 for a free estimate.
It does if your gate shares a street entry with the rest of the subdivision. We service nine major automation brands – LiftMaster, FAAC, BFT, and Mighty Mule among them – so we can match or integrate with whatever the community’s entry system already runs. Our technicians have up to 12 years of experience with those systems. Call (844) 797-2809 for a free estimate.
Yes, if your gate has an operator, UL 325 entrapment protection applies – it’s the safety standard that requires photo-eyes (the infrared beam that stops the gate if something crosses the path) or edge sensors. On shared HOA entries, a repair that touches the operator has to leave that protection working and documented. This is a genuinely dangerous component, so it’s a job for a trained technician. Call (844) 797-2809 for a free estimate.
Getting Started on Your Henderson Gate
If your Henderson gate is dragging, won’t latch, jumped the track, or needs welding that matches your association’s look, call (844) 797-2809 for a free estimate. You’ll get a written price before work begins, a photo record when we leave, and our 365-Day Done Right Promise covering the repair. A live person answers 24 hours a day, seven days a week.
Written by the team at Vance Gate Repair Summerlin.
