Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Summerlin, NV
A pedestrian gate is the walk-through gate next to your driveway gate – the one people use when they don’t want to open the big gate for a package, a guest, or the dog. In Summerlin, most of these are wrought-iron or ornamental steel swing gates on a self-closing hinge, sometimes paired with a keypad or an intercom so the mail carrier and the landscaper can get in without a remote. We install and repair them as part of our Gate Installation work, and the process follows the same written-price rule as every other job we run.
If your walk gate is dragging on the ground, won’t latch, or sags on a hinge that’s pulled loose from the wall, that’s a normal call for us. Call (844) 797-2809 and a live person picks up, day or night. No voicemail loop.
Key Takeaways
- A standard pedestrian gate install in Summerlin runs roughly $650 to $1,900 installed, depending on material, width, and whether automation is added.
- Most walk-gate repairs (sagging hinge, bad latch, bent frame) land between $140 and $420.
- Every visit gets a written price before work starts and a photo record when we leave.
- The 365-Day Done Right Promise covers any repair we complete for a full year.
When You Need Pedestrian Gate
Here’s what we actually get called out for in Summerlin. If any of these sound familiar, it’s probably time for us to look at it.
- The gate sags and drags on the pavers. Hinge posts pull out of block walls and stucco over time, especially on the west-facing side of a property where the afternoon sun bakes the post. The gate drops a half inch, then an inch, and the bottom edge starts scraping.
- The latch won’t catch. A self-closing hinge that’s worn out won’t pull the gate fully home, so the latch tongue skips the strike plate. That’s a latched gate that looks closed and isn’t.
- You want a walk gate where there isn’t one. A lot of Summerlin properties have a single wide driveway gate and a long walk around to the front door. Adding a pedestrian gate shortens that walk and lets deliveries through without opening the main gate.
- You need controlled access on the walk gate. Keypad entry, a magnetic lock, or an intercom on the pedestrian gate is common in gated Summerlin neighborhoods where the HOA wants guest and vendor traffic managed separately from vehicles.
- The gate is hard to push open. That’s usually a hinge pin, a bent frame, or a ground swell issue from irrigation runoff. Worth checking before the hinge tears out of the wall.
- You’re adding a pool barrier or side-yard gate. Many Summerlin properties need a self-closing, self-latching gate for pool code. We build those to spec with the right hardware.
Our Pedestrian Gate Process

Whether it’s a repair or a new gate, here’s how a job runs from the first call to the last photo.
- First call and photo walk-through. You describe the gate, and we ask for a couple of photos if you can send them. A live person takes that first call at any hour. We line up a visit slot that fits your week.
- On-site measure and material check. The technician measures the opening, checks the hinge post and wall condition, and confirms the gate width and swing direction. If we’re matching an existing wrought-iron pattern, we note the spacing and picket size so the new gate matches.
- Written price before anything starts. You get the flat price on paper – gate, hardware, labor, any wall anchoring. That price is the price. If we find a rot or a post issue behind the wall, we stop, show you the photo, and re-price before continuing.
- Fabrication or repair. New gates are built to the measured opening. Repairs happen on-site: hinges re-set, latches realigned, frames straightened, or new hardware fitted.
- Adjustment and photo documentation. We swing the gate through its full travel, set the latch and self-closer, and photograph the hinge settings, latch gap, and hardware installed. You get that photo log when we leave.
- Walk-through with you. We hand you the record, walk the gate with you, and answer anything that isn’t obvious. Any adjustment in the next year is covered under the promise.
Before
AfterPedestrian Gate Pricing in Summerlin
Here’s a real number range, laid out before you call. These are typical Summerlin prices, not teaser figures.
| Item | Typical Range | Notes |
|---|---|---|
| Standard pedestrian gate installation (36″-48″ wide, ornamental steel) | $650 – $1,900 installed | Includes gate, hinges, latch, and anchoring. Custom patterns and wide openings push toward the top. |
| Hinge repair or re-set | $140 – $320 | Depends on whether the post needs re-anchoring to block or stucco. |
| Latch or self-closer replacement | $120 – $280 | Hardware only, straightforward job. |
| Frame straightening / picket repair | $180 – $420 | Cost depends on how far out of alignment the frame is. |
| Keypad or intercom access on the walk gate | $350 – $900 | Depends on the brand and whether you already have a controller the new device ties into. |
| Self-closing / self-latching pool barrier hardware | $120 – $350 | Code-spec hinges and latches. |
What moves the number: the gate width and material, how well the hinge post is anchored, whether the wall is block or stucco over wood frame, and whether you want the walk gate tied into the same access system as the driveway gate. A gate tied to a LiftMaster or FAAC controller shares wiring and a power source; a standalone walk gate runs on its own. We quote both ways if it’s unclear.
If you’ve already gotten a written estimate from another company, bring it. We’ll review it at no cost and tell you straight whether it’s fair. Free second opinion on any written estimate.
What Parts Cost Adds Up To (and When It Doesn’t)
Hardware is where people get surprised. A heavy wrought-iron walk gate needs heavier hinges than the light steel gate at a big-box store. We source hinges and latches to match the gate weight, and we list every part number on the written quote so you can see what you’re paying for. If a customer’s existing gate just needs a new latch, we’re not going to quote a whole gate. The repair is the service.
We also service the automation side if the walk gate is on a keypad or tied to a Mighty Mule or BFT opener. That work is documented the same way, with a wiring record and photos left with you.
Why Documentation Matters on a Walk Gate

Pedestrian gates are simple, which makes them easy to do badly. A hinge that’s shimmed with a washer inside a loose post will hold for a season and then fail. When we do a repair, we photograph the hinge settings, the latch gap, and the anchor points. That record lives in the job file and goes home with you. If something moves in six months, we have the photo to compare against – no guessing, no re-charging you to rediscover what’s already known.
The same discipline goes into new installs: picket spacing, gate width, swing clearance, and hardware specification all get measured and recorded. If your HOA wants documentation of a finished install, we can provide it.
Pedestrian Gate vs. Driveway Gate – What’s Different
A driveway gate is built to take a vehicle load and is usually automated. A pedestrian gate is smaller, lighter, and built around a walking threshold. The two differ mainly in hardware selection. Driveway gates use heavy operators and safety photo-eyes; a walk gate typically uses a self-closing hinge or a lighter latch. If you’re adding a walk gate to a driveway that already has a LiftMaster or FAAC system, we can tie the new gate into the same access control, or keep it standalone. Either way, you get a written price before any hardware is ordered.
FAQs – Pedestrian Gate

How much does a pedestrian gate cost in Summerlin?
A standard pedestrian gate install in Summerlin runs roughly $650 to $1,900 installed, depending on width, material, and whether it’s tied to an access controller. Repairs are usually $140 to $420. Call (844) 797-2809 for an exact quote – estimates are free and written.
Can you install a pedestrian gate on a block wall?
Yes. Block-wall hinge anchoring is standard work for us. We set the hinge post with proper anchoring hardware and photograph the anchor before we leave so the record shows what was installed. If the block is older or has cracks near the anchor point, we’ll flag that before we start and re-price if the wall needs reinforcing.
Can you tie a walk gate into my existing gate opener?
Yes, if the opener supports an accessory output. We work with LiftMaster, FAAC, BFT, and other systems, and we can add a keypad or intercom to the walk gate that shares the existing controller. If your opener doesn’t support a second device, we’ll tell you on the quote rather than charging you to find out later.
My pedestrian gate sags and drags – is it worth repairing or replacing?
Repair is almost always cheaper than replacement, and it’s usually what we recommend. A sagging gate is typically a hinge or post issue, not a failure of the gate itself. We quote the repair cost on site. If the frame is bent beyond what’s worth straightening, we’ll show you the photos and explain why replacement makes more sense. The decision is yours with the numbers in front of you.
If you’re in Summerlin and thinking about a walk gate, a repair, or just want a second set of eyes on a quote you already have, call (844) 797-2809. We’ll schedule a visit, get a written price to you, and leave you with a clear record when we’re done. Free estimate, live person answering the phone, and a documented job every time.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin.