Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor & Opener Across Sunrise Manor
Most gate operator calls in Sunrise Manor don’t start with a dead motor. They start with a post that moved. The expansive clay under this part of the east valley swells after a monsoon and shrinks hard in June, and a swing gate that was plumb when it was installed can be off by an inch or two within a couple of seasons. When that happens, the operator keeps pushing against a gate that’s fighting its own hinges, and something gives. We work on gate motors and openers across Sunrise Manor, from the tract streets off Nellis Boulevard out to the larger lots where a solar operator is the only practical way to power a gate at the end of a long drive. Call (844) 797-2809 and a live person picks up, day or night.

Why Vance Gate Repair Summerlin Is Sunrise Manor’s Preferred Gate Motor & Opener Company
Sunrise Manor homeowners tend to have already read the reviews before they call, and what they’re looking for is simple: a written price and a record of what was actually done. That’s the whole job for us. Under The Haven Standard, you get a written scope and a written price before a tool comes out of the bag, and a photographed record of every adjustment when we leave. Clause 4 is the evidence clause: limits, wiring, part numbers, all documented on the visit.
We service nine major automation brands, which matters here because the operator already on your gate is usually old and usually worth repairing. We’re not going to steer you toward a replacement to make the invoice bigger. If a Linear unit from 2004 has a bad control board and the frame is sound, we repair it. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives with a name and photo sent ahead.
Response into Sunrise Manor is quick. We know the 89110 corridor, the way the side streets feed off Charleston and Lamb, and how much time to budget for a job once we see a gate that’s been leaning for a while. If you have a written estimate from another company, bring it. We’ll review it free.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Motor & Opener Services in Sunrise Manor

Motor Repair
Repair is the bulk of what we do in Sunrise Manor, and it starts with the gate, not the motor. Before we touch the operator, we check plumb, hinge wear, and post footing. A swing gate on a settled hinge post will burn through a new motor’s gears in a season if the geometry isn’t corrected first. We re-plumb, re-set, then repair or replace the operator and realign the arm or rack to match the corrected gate. Our Gate Motor & Opener team handles all of it on one visit where the parts allow.

Solar Gate Opener
On the larger lots and long driveways around Sunrise Manor, running 120-volt power to the gate is often the expensive part of the job, not the operator. A solar setup removes that trench and conduit run, but it has to be sized for this climate. Panel wattage and battery capacity that work fine in a milder climate fall short through a Vegas summer, when the panel is baking at 150°F in direct sun and the battery is losing capacity faster than the spec sheet promised. We plan the solar side around actual sun hours and gate cycles, not a generic kit.

Battery Backup
A battery backup is what keeps a gate working when the power drops or when the panel hasn’t caught up after a stretch of cloud cover. In Sunrise Manor’s heat, batteries age out faster than most people expect, and a backup that tested fine in spring can be flat by August. We test capacity, replace cells before they strand you, and photograph the readings so the next visit starts with data instead of a guess. Ghost Controls and Mighty Mule units are common on the smaller residential gates here, and both take a proper deep-cycle replacement if the original is tired.

Slide Motor
Slide gates on the older tract lots have their own failure pattern: the track fills with grit, a post shifts, and the operator drags the gate instead of rolling it. That drag is what kills the motor. We clear and re-level the track, check the wheels, and then look at the operator. Where the footing has moved, resetting the post comes before anything electrical.
Before
AfterTrusted Brands We Service in Sunrise Manor
We work on the operators that are actually on Sunrise Manor gates, not a single brand we’d prefer to sell. That includes Elite, Ghost Controls, Mighty Mule, and Linear on the residential side, plus DoorKing where a property has an entry system. We don’t keep parts stock on a shelf, so we diagnose, quote the specific part in writing, and order what’s needed. Turnaround is usually a few days on common boards and arms, and we tell you the lead time up front rather than after the fact. The point of servicing nine brands is that you don’t have to find a different company for whatever motor is already bolted to your gate.

See the difference
Before
After
Before
After
Before
AfterCommon Gate Motor & Opener Problems We See in Sunrise Manor Homes

- Operator electronics fried in the summer heat. Older LiftMaster and Linear units rely on internal thermal protection that fails with age, and once it does, a 110°F afternoon can cook the control board. If your operator shut down mid-summer and never came back, that’s usually the reason.
- Post footings shifted after monsoon rains. The shrink-swell clay under this part of the valley moves with the water table, and when a hinge post settles, the gate goes out of plumb and the operator burns out pushing against it. Re-plumbing the post is the repair; the motor is the symptom.
- Solar openers losing battery capacity in extreme heat. A rural entrance on solar will test fine in spring and leave the gate stuck open in August, because heat degrades battery capacity faster than the panel can compensate. Capacity testing beats waiting for a failure.
- Rusted welds and frozen hinges on original metal gates. Much of the wrought-iron and chain-link perimeter fencing along the older east-side tract streets is 30 to 50 years old, and the welds at the hinge points are the first to go. A frozen hinge loads the operator the same way a bad post does.
Pricing for Gate Motor & Opener in Sunrise Manor, NV
Here’s roughly what the work runs in Sunrise Manor, quoted in writing before anything starts:
| Job | Typical range |
|---|---|
| Gate motor repair (diagnosis, board, arm, or gear work) | $180 – $450 |
| Post re-set or re-plumb (footing corrected) | $350 – $800 |
| Swing-gate operator replacement | $650 – $1,600 |
| Slide motor and track realignment | $500 – $1,400 |
| Solar opener install (panel, battery, operator) | $900 – $2,200 |
| Battery backup replacement | $180 – $420 |
What moves the number: whether the post needs resetting before the operator is touched, gate width and weight, and how far a power run has to go if you’re not going solar. The price is written and handed over before work begins, and it’s the price you pay. If a written estimate from another company has you unsure, bring it and we’ll review it at no charge.
We Also Serve Cities Near Sunrise Manor

We handle gate motors and openers in the communities surrounding Sunrise Manor, including Whitney, Winchester, Las Vegas, and North Las Vegas. If you’re just outside the 89110 boundary, call and we’ll confirm coverage. You can read more about our work across Sunrise Manor and the neighboring areas on our city page.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Motor & Opener in Sunrise Manor

Because the posts move here. The expansive clay soils and monsoon rains shift footings often enough that operators fail from misalignment rather than motor burnout, which is less common in the cooler, more stable suburbs of the valley. A gate that’s out of plumb fights its own hinges, and the operator absorbs that load until the gears or the board give out. Re-plumbing the post and realigning the operator is the durable fix. Call (844) 797-2809 for an exact quote on your gate, free.
Yes, if it’s sized for this climate rather than a milder one. Solar is often the smarter choice here because the alternative is trenching a power run hundreds of feet, but extreme heat degrades battery capacity and the panel needs enough wattage to recover after cloudy days. We plan panel and battery around real sun hours and gate cycles, not a generic kit rating. Call for a written estimate before you buy anything.
Stop cycling it and check whether the gate itself is binding. A motor that hums without moving usually means a stripped gear, a slipping arm, or a gate that’s jammed against a shifted post, and running it repeatedly turns a cheap repair into a motor replacement. Don’t force it by hand against the operator. Call (844) 797-2809 and we’ll get someone out, with a written price before work starts.
Yes. Automatic gates need photo-eyes (the infrared beam that stops the gate if something crosses the path) and, on many residential installs, a monitored entrapment-protection setup, and older operators often predate these requirements. We check the safety devices on every visit and document what we found. This is genuinely dangerous equipment to test by hand, so leave the adjustment to a trained technician. Call for a safety check and a written price.
Watch the gate’s top edge against the post as it swings: if the gap changes from one end of the travel to the other, or the gate doesn’t sit level, the post has likely moved. A gate that drags at one point in the swing or a latch that suddenly doesn’t line up is the same signal. Left alone, it’s what burns out the operator. Call (844) 797-2809 for a free assessment and a written quote.
Written by the team at Vance Gate Repair.