A Vance company - serving Summerlin, NV

Mighty Mule Welding & Fabrication in Summerlin, NV

Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Mighty Mule Welding & Fabrication: The Summerlin Owner’s Guide

Welding and fabrication repair for a Mighty Mule gate in Summerlin typically runs $250 to $650 for the bracket, hinge, post, and frame work itself, plus $95 to $180 for the on-site labor to fit and align it. We weld on site and in our fabrication shop, and most Summerlin calls are scheduled within one to three business days. Under the Haven Standard, you get the written price before the torch is lit.

Call (844) 797-2809

Owners usually find this problem in stages. First there’s a gate that drags at the bottom of its arc. Then a hinge that looks bent, or a bracket mount that has cracked along the weld. Then, on a windy afternoon in Summerlin, the whole thing shifts a quarter inch and the opener starts throwing its limit switch. The motor isn’t the problem. The frame has lost its shape.

Which Mighty Mule Models This Applies To

Mighty Mule is a common sight on Summerlin driveways, especially the MM series (MM360, MM560, MM660) and the E-Z Gate line, plus the heavier GM and FM series on wider ranch-style gates. The welding and fabrication work doesn’t depend on the model number, but it does depend on the gate itself. Here’s the thing to check: the gate’s leaf weight and its material. A hollow aluminum gate welds differently from a steel tube one, and a wood gate needs a different mounting approach entirely. Most of the parts we fabricate are steel hinges, gate brackets, ground stops, and post caps, and each one is measured on site before we cut.

Before we quote anything, we look at the label plate on the gate frame or on the opener housing, and we measure the leaf width and thickness. That plate number tells us the gate’s rated duty and its intended weight. Getting that wrong is one of the most common ways a Summerlin owner pays twice.

We are an independent service provider, not affiliated with Mighty Mule, and we don’t carry a parts inventory on a truck. That’s a deliberate choice. Every bracket we install is measured, cut, and welded to your gate, not pulled from a shelf and fitted with a hammer.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Signs Your Mighty Mule Welding & Fabrication Is Failing

Technician performing professional gate hardware installation and repair
Signs Your Mighty Mule Welding & Fabrication Is Failing

The failure usually announces itself through the gate’s behavior before you see a crack. These five symptoms are the ones we see most often in Summerlin:

  • The gate drags at the bottom of its swing. That’s a hinge that has bent beyond its design pitch or a bracket mount that has pulled slightly out of square. You’ll feel it as a hesitation at the start of the arc.
  • A visible crack in the bracket, hinge plate, or frame weld. A fatigue crack at a weld toe is a sign the original weld bead didn’t have enough penetration for the gate’s weight. Left alone, it grows.
  • The opener strains or the arm binds mid-travel. If the gate is no longer square to the post, the swing arm has to fight the geometry. The opener often gets blamed for a frame problem.
  • The gate sticks in cold weather and frees up as it warms. Here that’s usually the opposite of snow country: in Summerlin’s dry heat, a shrinking weld can open a hairline crack that closes again at night. It’s the seasonal swing that gives it away.
  • Wobble at the post cap or the ground stop has shifted. The base plate or post cap anchor has loosened, or the concrete beneath the post has cracked. Either way, the gate loses its reference point and the opener can’t hold a consistent limit.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
BeforeBefore
AfterAfter

Replacement Cost & What’s Included

Here’s the honest installed range for Summerlin, based on what we actually weld and fit. These aren’t estimates pulled from a national average; they’re what our written quotes come out at on a Summerlin driveway.

Work Typical installed cost
Hinge replacement or re-weld, per hinge $150 – $280
Gate bracket fabrication and fit $220 – $420
Post cap or ground stop replacement $180 – $350
Frame straightening and re-square $300 – $650
Full frame weld-out and alignment $500 – $1,100
On-site labor (fit, measure, align) $95 – $180
Shop fabrication of a custom bracket $120 – $300

The range depends on the gate’s weight, whether the post is sound, and whether we fabricate a custom piece or fit a standard one. You get a written price before any work starts, with the part number and the weld spec on the page. Under Clause 4 (Evidence on every job), we photograph every weld, bracket, and adjustment, so you have a record of what was changed. And the 365-Day Done Right Promise covers the work for a full year.

DIY or Call Us?

professional gate repair service
DIY or Call Us?

Welding a gate bracket is hot, high-current work done near your opener, your wiring, and your gate’s spring, and I’ll be plain with you: this isn’t a job for a homeowner with a shop welder and a free afternoon. There’s a real chance of a warped frame, a fire in the wiring run, or a gate that swings off its arc and puts load on the opener motor. A licensed technician should do the weld. What you can safely do yourself is look: measure the gap between the gate leaf and the post, photograph any crack, note where the hinge is worn, and check that the gate still latches by hand. That’s the paperwork we want to see.

For the rest, call (844) 797-2809. We’ll pick up, and we’ll bring the written price.

Get the price in writing before anything starts.A real person answers, day or night.
Call now

FAQs

Need Gate Repair help nationwide? Licensed & insured · 1-hour response · free estimates
Call (844) 797-2809
Local Service Coverage

Request a Free Estimate in Summerlin

Tell us what you need - Vance Gate Repair Summerlin responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch