Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Hinge & Roller Replacement: The Summerlin Owner’s Guide
We replace failed Mighty Mule hinges and roller assemblies in Summerlin for $185 to $420 installed, and it’s a job we can usually schedule the same day once we’ve matched the part to your model. That price covers the hinge or roller hardware, new fasteners, and the labor to align the gate so the leaf rides true again. Most Summerlin owners don’t know the part is going until the gate starts dragging. You hear a scrape on the driveway. The leaf sags a few inches at the latch end. Or the gate swings fine by hand but the opener strains and quits mid-cycle, because a seized roller is fighting the arm.
Which Mighty Mule Models This Applies To
Mighty Mule hinges and rollers show up across the brand’s swing-gate lines, and they are not interchangeable. The most common residential models in Summerlin driveways are the FM350, FM500, FM600, and the larger MM series condensers, along with the lighter DIY-focused single and dual swing kits. The hinge brackets on the FM series and the older Mighty Mule swing brackets differ in pin diameter and hole spacing, which is the compatibility gotcha that trips people up: the bracket looks identical in a product photo but won’t seat on your post plate. To identify the right part, photograph the hinge plate from the gate side, measure the pin shaft diameter with calipers, and measure center-to-center on the bolt holes. If your gate has a label, the model number is usually there too.
On the OEM-versus-aftermarket question for Mighty Mule specifically: OEM hinge and roller parts are the safest match for an FM series gate, because the tolerances are set for that bracket. Quality aftermarket equivalents exist and hold up fine on heavier custom gates, but we check the pin diameter and plate gauge before installing one. We’re an independent service provider, not affiliated with Mighty Mule; we work on whatever motor is already on the property, and we service the other major brands too, including LiftMaster, Ghost Controls, and DoorKing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Mighty Mule Hinge & Roller Replacement Is Failing

- The gate sags at the latch end. A worn hinge pin or a wallowed-out bushing lets the leaf drop, so the gate no longer closes square against the post. That sag loads the opener arm and the hinge bracket, which accelerates the wear.
- A scrape or grind on the driveway. A failed roller or a dipped hinge has the bottom frame dragging. Left alone, the scrape chews into the gate, the driveway coating, and eventually the opener’s limit travel.
- The gate swings stiff by hand. Push the leaf open with the opener disengaged. If it fights you, the roller or hinge is binding, and a Mighty Mule arm rated for a free-swinging gate will stall and alarm.
- Visible rust streaks or a loose pin at the hinge. Summerlin’s dry heat followed by monsoon humidity and sprinkler overspray works on powder-coated hinge plates and steel pins in a way that a mild climate doesn’t. A pitted pin with rust streaks means the roller or hinge has seized.
- The gate binds or the arm shudders mid-cycle. When a roller seizes, the opener arm takes the load and the leaf shudders. That’s the point where we often find the Mighty Mule motor close to failure if the hinge isn’t addressed.
Before
AfterReplacement Cost & What’s Included
| Job | Typical installed price (Summerlin) |
|---|---|
| Single hinge or roller replacement | $185 – $260 |
| Full hinge and roller set, single gate | $260 – $360 |
| Dual-gate full set, including realignment | $360 – $420+ |
What drives the range: how many hinge points the leaf has, whether the gate is a single or dual swing, and whether the post plates need shimming or the gate needs re-hanging after a long sag. The price is written and handed to you before any work starts, so you see the hinge and roller line items as hardware plus labor, not a surprise at the end. Under the 365-Day Done Right Promise, if the repair isn’t right, we make it right at no additional charge within that window. Under Clause 4 (Evidence on every job), every visit leaves a photographed record of the part number installed and the readings we set.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?

Honest split. An owner can safely check the easy things: push the gate open by hand with the opener disengaged to feel for binding, look for rust streaks or a loose hinge pin, and photograph the hinge plate to identify the model. What goes wrong in DIY on this part is the load. The gate leaf is heavy, and a hinge or roller that lets go under load can swing or drop on a hand. The gate’s spring-loaded counterweight and the opener arm also store energy, and a Mighty Mule arm dropped mid-repair can recoil. That engineering work is not a one-person driveway job. If you’re unsure of the part or the gate is sagging badly, call us at (844) 797-2809 and we’ll walk you through what to look for before you touch anything.
FAQs
How long does a Mighty Mule hinge or roller last? Expect about 8 to 12 years for a quality hinge or roller in a protected spot, less on a Summerlin gate facing full sun and sprinkler overspray. The pin and bushing take the load, so they wear first. Call (844) 797-2809 for a free estimate if the gate is sagging or scraping.
Can the hinge or roller be repaired instead of replaced? Sometimes. A hinge with a worn bushing but an intact pin can be re-bushed, and a roller with a bent bracket can sometimes be straightened and re-set. But once a pin is pitted or the plate is cracked, replacement is the durable answer. We’ll tell you which you’re looking at, and the price is written before the work starts. Call (844) 797-2809 for an exact quote.
How long does the swap take? Most single-gate hinge and roller sets run one to two hours on site, and a dual gate can run two to three once the leaf is re-hung and realigned. We schedule same-day when the part matches the model. Call (844) 797-2809 to confirm timing for your gate.
How do we source the Mighty Mule part? We match the part to your model and to the measured pin diameter and plate gauge, then order the hinge or roller hardware that fits. You get the part number in writing on the invoice and on the photo record, so a future technician knows exactly what’s on the gate. We’re an independent provider, not affiliated with Mighty Mule. Call (844) 797-2809 and we’ll quote the exact part for your Summerlin gate.
Get Your Mighty Mule Hinge or Roller Quoted in Writing

If you’re in Summerlin and your Mighty Mule gate is sagging, scraping, or straining the opener, call Vance Gate Repair Summerlin at (844) 797-2809 for a free estimate. We’ll match the hinge and roller to your model, hand you a written price before any tool comes out, and leave a photo record of the part installed. A live person answers the phone at any hour, and our technicians can also review a written estimate from another company at no charge.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.