LiftMaster operators
Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateLiftMaster Keypad & Intercom Repair: The Summerlin Owner’s Guide
LiftMaster-compatible keypad and intercom repair in Summerlin typically runs $185 to $420 installed, depending on whether we’re swapping a standalone wireless keypad or a wired intercom station tied into a gate operator. Most jobs are diagnosed the same day you call and finished on the first visit when the part is a common model. We answer the phone 24/7 at (844) 797-2809, and the written price is in your hand before a tool comes out.
Owners almost always discover this failure the same way. The keypad code that worked for years now blinks and refuses, or the intercom buzzes but no voice comes through, and the guest inside the house ends up walking down the driveway to open the gate by hand. In Summerlin we see it most on older LiftMaster wireless keypads mounted on west-facing stucco pillars, where the afternoon sun pushes surface temps past 150°F and cooks the battery contacts and keypad membrane years before the electronics quit.
Which LiftMaster Models This Applies To
LiftMaster keypads split into two families: standalone wireless units (the 387LM, 877LM, and the newer 878MAX) and wired or networked keypads that live inside the operator’s control box. Intercom stations are a separate animal, usually part of a LiftMaster gate operator package like the CSL24U or SL585, or a paired accessory that talks to an indoor station. The model number is on a label inside the keypad housing, on the back plate, or stamped into the operator’s control-box cover, and it’s the first thing we photograph.
Here’s the compatibility gotcha that burns people: the 878MAX and 877LM are not interchangeable even though they look nearly identical on the pillar. Security+ 2.0 versus Security+ 1.0 rolling-code systems use different frequencies and won’t pair, so grabbing the wrong box off a shelf leaves you with a keypad that lights up and does absolutely nothing. Bring us the old unit or its label and we match the exact protocol, not the closest guess.
On the OEM-versus-aftermarket call: LiftMaster-branded replacements are the safest match for the wireless keypads, and the price difference over a good aftermarket equivalent is usually modest enough that we recommend staying OEM. For intercom stations and discontinued models, a quality aftermarket or refurbished match is often the only realistic path, and we tell you plainly which one you’re getting and why.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your LiftMaster Keypad & Intercom Repair Is Failing

- Keys beep but the code is rejected. The membrane or the rolling-code memory has drifted, so the keypad reads your entry but no longer matches what the operator expects.
- Backlight dim or dead in direct sun. UV and heat have degraded the LCD or LED panel; the keypad still draws power but you can’t read a thing at midday.
- Intermittent operation in summer. Thermal expansion at the wiring terminals loosens a connection, so the keypad works at 7 a.m. and fails at 4 p.m.
- Intercom buzzes but no voice. The speaker or microphone element has failed, or the twisted-pair run to the house has a broken conductor at a splice.
- Indoor station dead while gate station works. A power supply or station board has failed on the indoor side, which is a separate repair from the outdoor unit.
Each of these points to a different root cause, and that’s exactly why we photograph the failure before touching anything. A keypad that “stopped working” is a symptom, not a diagnosis.
See the difference
Before
After
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Pricing in Summerlin breaks down by the part and the labor to match it to your operator:
| Job | Typical installed range |
|---|---|
| Wireless keypad swap (387LM/877LM/878MAX class) | $185 – $260 |
| Wired or networked keypad repair/replace | $240 – $340 |
| Intercom station replace (single station) | $300 – $420 |
| Wiring or splice repair to an existing station | $150 – $290 |
What drives the range: whether the wiring is intact, whether we’re programming a fresh rolling code or cloning an existing one, and whether the mount has to be reworked on an aging stucco pillar. The written price covers the part, the labor, and the programming, and it’s handed over before any work starts under Haven Standard Clause 1. Every completed repair carries the 365-Day Done Right Promise.
DIY or Call Us?

Some checks are safe and worth doing yourself. Confirm the keypad has fresh batteries if it’s a battery unit, look for a tripped breaker feeding the operator, and read the model label so you know what you actually own. That’s the extent of it.
Where DIY goes wrong here is at the 120/240-volt side. Wired keypads and intercom stations draw from the gate operator’s power supply, and poking around a live control box with a screwdriver is how people get hurt. The code work is also unforgiving: a rolling-code pairing done wrong can lock out every remote on the property, and untangling that costs more than the original repair. Call us at (844) 797-2809 and we’ll tell you over the phone whether it’s a five-minute fix or a real part failure.
FAQs
How long does a LiftMaster keypad last in Summerlin? A wireless keypad exposed to full desert sun typically lasts 5 to 8 years before the membrane or battery contacts give out, versus 10-plus on a shaded mount. Mounting on a shaded pillar or under an eave is the single biggest lifespan factor here.
Can my keypad or intercom be repaired instead of replaced? Often yes, especially on wired units where the fault is a splice or a power supply rather than the keypad itself. We diagnose first and only recommend replacement when the board or membrane is genuinely done.
How long does the swap take? A wireless keypad swap and reprogram is usually under an hour; a wired intercom station replacement runs one to two hours depending on how accessible the wiring is. We schedule it around your day and confirm the scope in writing before we start.
How do you source the part? We match your exact model and rolling-code protocol, then source it from a supplier we can stand behind, not the closest shelf item. You get the part number in writing and a photo record of what was installed before we leave.
If your LiftMaster keypad or intercom has quit on you, call (844) 797-2809 for a free estimate. We also service Mighty Mule, Ghost Controls, DoorKing, and the other major gate-automation brands, so whatever motor is on your property, we can work with it. Vance Gate Repair Summerlin is an independent service provider and is not affiliated with LiftMaster. A live person answers 24/7, the price comes in writing before any work begins, and every visit leaves a documented photo record of what we found and what we fixed.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.