Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Summerlin: What to Know First
We repair Ghost Controls gate openers and gates in Summerlin, and most jobs are finished in a single visit, often the same day you call. Typical repairs run $185 to $480 depending on what’s failed – a control board, an arm, a limit switch, a hinge or a post. We write the price down before anyone picks up a tool, and you get a photo record of what we found and what we changed. This page is for Summerlin homeowners who already own a Ghost Controls system and want it fixed rather than talked into a replacement. Call (844) 797-2809 and a live person answers.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls systems are built for owner installation, and that shapes how they fail. The hardware is sound; the installation and the Summerlin climate are usually where the trouble starts. Here are the five failures we see most often on Ghost Controls jobs in Summerlin.
- Arm bracket loosening on the tube gate. Ghost Controls single and dual swing kits (the TSS1 and TDS2 families) mount their actuator arms to a bracket that bolts to the gate frame. On hollow aluminum frames common in Summerlin backyards, that bracket works loose over a season or two and the gate starts dragging or reversing mid-travel. We re-set the bracket with proper backing, torque it to spec, and photograph the new position.
- Limit switch drift after a heat cycle. Summerlin summers push the actuator housing past 140°F in direct sun, and the limit switches that tell the operator where the gate opens and closes creep. The symptom is a gate that stops short, over-travels, or reverses at the end of its run. We read the actual switch positions with a meter, reset them, and log the readings so the next technician starts from a known number rather than a guess.
- Control board failure from a bad photo-eye or a wet enclosure. Ghost Controls boards are sensitive to a shorted photo-eye (the infrared beam that stops the gate if something crosses the path) and to moisture in the control box. Monsoon-season rain and irrigation overspray get into enclosures that weren’t sealed well. We test the beam alignment, dry and reseal the box, and replace the board only if it’s actually failed – not as a first move.
- Battery and solar charging faults. Many Ghost Controls kits in Summerlin run on solar or a low-voltage transformer. A solar panel shaded by a mature palo verde or a transformer tapped into an undersized circuit gives you a gate that works at noon and quits by evening. We trace the charge circuit and confirm the panel or transformer is actually delivering before we touch the operator.
- Hinge, post and rust damage underneath the automation. A gate that’s been dragging for months wears its hinges and stresses the post. We check the gate’s mechanical health first, because a perfect operator on a sagging gate will fail again in weeks. Weld repair, re-hanging and realignment often matter more than the motor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Repair Process

Every Ghost Controls job follows the same sequence, and the written price comes before any tool comes out.
- 1
Call and diagnostics. You describe the symptom on the phone and a live person takes it down. When we arrive we test the operator, the photo-eyes, the limits, the power source and the gate’s mechanicals, then tell you what’s actually wrong.
- 2
Parts decision, written down. If a part has failed, we explain the OEM-versus-aftermarket trade-off in plain terms – OEM boards cost more and preserve the warranty, quality aftermarket parts cost less and don’t. You choose. We write the scope and the flat price on paper and hand it to you before we start.
- 3
The repair. Board swaps, arm and bracket work, limit resets, photo-eye alignment, hinge and post repair, weld and rust treatment – whatever the diagnosis called for.
- 4
Full cycle test. We run the gate through its complete travel with the safety devices live, check the force and the limits, and confirm the reverse-on-obstruction works the way it should.
- 5
The record and the guarantee. Before we leave you get a photo log of every adjustment and a written record of the part installed. The repair is covered by our 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Repair Costs in Summerlin
These are the ranges we actually write on estimates in Summerlin. The flat price you’re quoted is the price you pay – no surprise invoice at the end.
| Repair | Typical price |
|---|---|
| Limit switch reset / travel adjustment | $185 – $240 |
| Photo-eye replacement and realignment | $200 – $290 |
| Control board replacement | $340 – $520 |
| Actuator arm or bracket repair | $280 – $460 |
| Hinge, post or realignment work | $250 – $600 |
| Weld and rust repair | $300 – $700 |
What moves the price: OEM versus aftermarket parts, whether the gate also needs mechanical realignment, dual-gate setups versus single, and whether a power or solar fault needs tracing. Estimates are free and written. Call (844) 797-2809.
Why Summerlin Homeowners Call Vance Gate Repair Summerlin for Ghost Controls Work

We’re an independent Ghost Controls service provider – not affiliated with or authorized by Ghost Controls – and that independence works in your favor. We service nine major gate-automation brands, including LiftMaster, Mighty Mule and DoorKing, so we can work on whatever motor is already on your property instead of steering you toward a replacement. Our technicians have up to 12 years of experience. Every visit is documented with photos and a written price, and the 365-Day Done Right Promise covers the repair for a full year. Call (844) 797-2809 and a live person answers, any hour.
FAQs
Does repairing my Ghost Controls opener void its warranty? No, as long as the right parts are used. OEM parts preserve the manufacturer warranty, while aftermarket parts may not. We explain the trade-off in writing before you decide.
Can you get Ghost Controls parts in Summerlin quickly? Yes. We source OEM and quality aftermarket Ghost Controls parts, and most common failures – boards, arms, photo-eyes, limits – are repaired in a single visit. Call (844) 797-2809 for a parts-availability answer on your specific model.
Should I repair my Ghost Controls opener or replace it? Repair is almost always the right call on a functioning Ghost Controls system. The operator is usually sound; the failure is a part, a limit setting, or the gate’s mechanicals underneath. Replacement only makes sense when the board and the arm have both failed and the gate itself is worn out.
How fast can you repair my Ghost Controls gate in Summerlin? Most Ghost Controls repairs are done same day. Call (844) 797-2809 and a live person will take your symptom and get a technician out. Estimates are free and written before any work starts.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.
Ready to get your Ghost Controls gate working again? Call (844) 797-2809 for a free written estimate.