Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Installation in Summerlin: What to Know First
We install Ghost Controls gate automation in Summerlin, and most standard residential jobs are measured, quoted, and scheduled within a few days of your call. You’ll have a written, flat price in hand before anyone touches your gate, not a “call for a quote” and not a surprise invoice at the end. This page is for Summerlin homeowners who already own a Ghost Controls operator or have one picked out and want the installation done correctly, with the wiring documented and the limits set right. If that’s you, call (844) 797-2809 and a live person will pick up.
How Ghost Controls Products Fail – and How We Fix Them
Ghost Controls makes a genuinely homeowner-friendly line of solar and AC swing-gate operators, popular in Summerlin partly because they don’t need a licensed electrician for the solar models. That does not mean the install is forgiving. Here’s what we actually find on Summerlin gates, and what we do about it.
- Solar-charged operators that test fine at noon and dead by dusk. We see this most on the HD and AXX series, especially when the panel was mounted on a north- or east-facing wall of a Summerlin block wall. Afternoon shade looks harmless but the battery never fully recovers. We meter the panel output and the battery under load before assuming the operator is bad, then reposition or add a panel to get real charge hours.
- Fence-side limit switches drifting out of range. The Ghost Controls arm rides the gate leaf and its limits are set by physical stops. On gates that see Summerlin’s summer heat cycling, the stops loosen and the gate starts short-stroking or overtraveling. We re-set the stops, measure the travel, and photograph the new positions so the next technician has a starting point.
- Photo-eye pairs knocked out of alignment. The infrared beam across the driveway gets bumped by everything from trash cans to the landscape crew. If your gate reverses mid-travel for no obvious reason, this is usually why. We realign the pair and verify with a simple block test before we leave.
- Undersized wiring runs on AC models. On the AC-powered Ghost Controls units, we regularly find the installer used lighter wire than the gate and run length call for. The result is voltage sag that shows up as a weak arm or a board that resets when the gate meets resistance. We pull the right gauge for the distance, not the nearest coil on the shelf.
- Pivot and bracket wear that the operator gets blamed for. A worn hinge or a bracket losing its grip reads like an operator failure. We test the leaf first, because installing a new Ghost Controls arm over a loose bracket just means we’ll be back. We tighten or replace the hardware before the operator goes on.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Ghost Controls Gate Installation Process

Every Ghost Controls job runs the same way, whether it’s a single-leaf driveway gate, a pedestrian gate, a sliding gate, or a double-leaf swing gate.
- 1
Phone diagnosis. We ask what operator you have (model number if you have it), the gate type, and how it’s powered. A live person answers at any hour, and you’ll get a realistic sense of what’s involved before we’re on the property.
- 2
On-site measure and electrical check. We measure the gate, check the hinges and posts, and verify the power situation if it’s an AC unit. We confirm the operator is sized for the leaf before anything else.
- 3
Written price, handed over. This is Haven Standard Clause 1 in practice: flat price, itemized, agreed before any tool comes out. If a part needs to be ordered, you’ll see the number before we order it.
- 4
Parts decision, written down. We’ll tell you straight whether an OEM Ghost Controls part is the right call or whether a quality aftermarket piece is a better fit for your gate. Ghost Controls doesn’t authorize us – we’re an independent Ghost Controls service provider – so we’re not locked into one brand’s pricing, and we’ll say so.
- 5
Installation and test. We mount the operator, run and route the wiring, set the limits, align the photo-eyes, and test the gate through a full open-close-reverse cycle. Every reading and adjustment gets photographed.
- 6
Walkthrough and photo log. Before we leave, you get a written record of the part numbers installed and a photo log of every setting. If something fails within 365 days, the 365-Day Done Right Promise covers it in full.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat Ghost Controls Gate Installation Costs in Summerlin
Ghost Controls installs run more than you may expect on paper, because most of the labor is in the gate, the wiring, and the setup, not the box. Here’s how the numbers tend to land.
- Single-leaf swing gate with a Ghost Controls solar operator: roughly $850 to $1,400 installed, depending on gate weight, post condition, and whether the bracket hardware needs rebuilding.
- Double-leaf driveway gate with two operators: roughly $1,600 to $2,600 installed, including the synchronized setup and dual photo-eye alignment.
- AC-powered Ghost Controls install with a new electrical run: add roughly $300 to $700 for the wire and conduit, depending on distance from the panel.
- Pedestrian or security gate install: typically $650 to $1,200, lower when the post and hinges are already solid.
- Sliding gate conversion or install: varies more, usually $1,200 to $2,200, because the track and guides have to be right before the operator goes on.
What moves the number most: gate weight and leaf condition, hinge and bracket wear, electrical run length, and whether the operator was already wired by someone else. The price is written and agreed before work starts, so there’s no second invoice to argue about. Estimates are free.
Why Summerlin Homeowners Call Vance Gate Repair Summerlin for Ghost Controls Work

We service nine gate-automation brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – which means we’re never steering you toward a replacement because we only know one system. If your gate came with a LiftMaster and you want a Ghost Controls operator, or the reverse, we’ll work with what’s already on the property and tell you plainly what makes sense.
Our technicians have up to 12 years of experience, they’re background-checked and uniformed, and you get a name and photo before they arrive. We’ve handled 22,000+ gates repaired and installed since 2014, and every one of those jobs left with a written price up front and a documented record after. A live person answers the phone 24 hours a day, seven days a week. If you’ve got a written estimate from another company you’re unsure about, bring it in – we’ll review it at no cost as a free second opinion.
FAQs
In most cases yes. Ghost Controls warranties typically cover the operator hardware, not the installation, so as long as the unit is installed to spec and wired correctly, the hardware warranty is generally unaffected. We’re not an authorized Ghost Controls installer, so we can’t process a warranty claim for you, but we document the install fully – part numbers, model, wiring – so you have the paperwork if you ever need it. Call (844) 797-2809 for a free estimate.
Most standard installs are scheduled within a few days of a written quote, and we confirm the date before we order parts. Unlike a repair, installation is a measured and ordered job, so we don’t promise same-day on new installs – but we will give you an honest timeline up front. Call (844) 797-2809 and we’ll tell you what’s realistic for your gate.
We order Ghost Controls parts per job to match your exact model, and you’ll see the cost in writing before we order. That’s a deliberate choice – it means you’re not paying a markup for stock sitting in a warehouse, and we’re ordering the right series for your gate rather than the closest thing on hand. Estimates are free; call (844) 797-2809.
It depends on what’s actually failing. A drifting limit switch, a misaligned photo-eye, or a battery that won’t hold charge is usually a repair, not a replacement – we’ve seen plenty of operators swapped out when a $40 battery or a realigned eye would have done it. If the board is gone or the arm is bent, replacement is often the better value. We test before we recommend. Call (844) 797-2809 for a free estimate and a straight answer.
Yes. We run and route the wiring, verify the AC feed on powered units, align the photo-eyes, and set the limits. On solar models we check panel placement for real charge hours, which matters in Summerlin where a shaded panel can look fine and still leave you stranded. Every connection is photographed and documented before we leave. Free estimate at (844) 797-2809.
If your Ghost Controls gate is overdue for an install or a repair, call Vance Gate Repair Summerlin at (844) 797-2809. A live person answers any hour, the price is written before any work starts, and you’ll have a photo record in hand when we leave.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.