Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateDoorKing Gate Installation in Summerlin: What to Know First
We install DoorKing gate operators and complete gate systems across Summerlin, and most residential installations are measured, ordered, and scheduled within a few days once the gate style and operator model are confirmed. Every job gets a written scope and a written price before anyone picks up a tool, so you know what the install costs before it starts. As an independent DoorKing service provider, we’re not affiliated with or authorized by DoorKing, and we price the work in dollars on this page rather than hiding it behind a callback form.
This page is for the Summerlin homeowner who already owns a DoorKing operator, or has one on order, and wants the gate and the motor installed together as one working system. We’re reachable at (844) 797-2809, and a live person answers at any hour.
How DoorKing Products Fail – and How We Fix Them
DoorKing is common on Summerlin driveway and sliding gates, and the operators have recognizable failure points. Here’s what we find on DoorKing gates and what the fix looks like.
- Model 6050 swing openers with a binding arm bracket. The 6050’s articulated arm wears at the pivot pin, and when the bracket loosens, the operator strains against the gate instead of moving it. On a Summerlin installation we check bracket integrity before mounting a new or relocated arm. Left alone, that strain eats the gearbox. Fix: rebuild or replace the arm bracket and set the arm geometry so the operator runs through its arc without loading against the hinge.
- Model 6400 / 6500 sliding-gate operators with a slipping or misaligned limit. The limit switch on these slides drifts over time, and a gate that “creeps” past its stop or reverses early is usually a limit set a few degrees out, not a dead motor. Fix: reset the open and close limits and photograph the new positions so the next technician isn’t guessing.
- Photo-eye and loop detector faults on DoorKing access-controlled gates. A photo-eye (the infrared beam that reverses the gate if something crosses the path) knocked about two inches out of alignment will cause intermittent reversal or a gate that won’t close. Loop sensors in the driveway can also fail when the saw cut fills with debris. Fix: realign the eyes, test the loops, and document what was adjusted.
- Undersized transformer and power runs on retrofit installs. DoorKing operators draw a specific current, and a power run that’s too thin or shares a circuit with landscape lighting will brown out the board under load. This shows up as random resets. Fix: verify the voltage at the operator terminals and correct the run before blaming the control board.
- Control-board moisture intrusion on exposed west-side installs. Summerlin’s summer monsoons and the fine desert dust that collects in enclosures both stress the board. A gate that works fine in spring and fails after the first hard rain is usually a compromised enclosure seal. Fix: reseal or replace the housing and mount the operator where runoff drains away from it.
We work on nine automation brands, so we’re not steering you toward a DoorKing replacement if your existing operator is a different make. If the motor on the property isn’t DoorKing, we still handle it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our DoorKing Gate Installation Process

- 1
Measure and scope. We measure the gate opening, check the hinge and post condition, and confirm which DoorKing operator model fits the gate’s weight and travel. You get a written scope and a written price before any work begins.
- 2
Parts decision, in writing. We lay out the OEM-versus-aftermarket options with the real trade-off: an OEM control board or arm keeps the warranty intact and fits exactly, while a quality aftermarket part can save money on an out-of-warranty operator. You choose with the numbers in front of you. We don’t swap brands to chase a part.
- 3
Installation and power. The operator, arm or carriage, and any safety edges or photo-eyes are mounted to the gate and posts. Power runs are verified at the terminals before the board is powered up.
- 4
Programming and travel limits. We set the open and close limits, program the remotes and keypad, and set the force and reverse sensitivity so the gate stops on contact with an obstruction.
- 5
Full test and photo record. Every adjustment gets photographed: the limit positions, the photo-eye alignment, the wiring at the board. That record goes with the job so a future technician doesn’t have to rediagnose the same gate.
- 6
Cleanup and handoff. We clear the site and leave you the written record. The 365-Day Done Right Promise covers the work, so if something isn’t right within the year, we make it right at no additional charge.
See the difference
Before
After
Before
After
Before
After
Before
AfterWhat DoorKing Gate Installation Costs in Summerlin
These are the ranges Summerlin homeowners see for DoorKing work, and the price you’re quoted is the price you pay, written and agreed before any tool comes out.
| Scenario | Typical range |
|---|---|
| Replace a DoorKing swing-gate operator (6050-class), existing arm and bracket intact | $850 – $1,400 installed |
| Replace a sliding-gate operator (6400/6500-class) including limit setup | $900 – $1,600 installed |
| New DoorKing operator on an existing gate (operator, arm, photo-eyes, programming) | $1,200 – $2,200 installed |
| Full new gate plus DoorKing operator | $3,500 – $7,000+ depending on gate size, material, and swing vs. slide |
| Photo-eye, loop, or safety-edge add-on | $150 – $450 each |
The main price drivers are gate weight and width, whether it swings or slides, whether a concrete footing is needed for a post, and whether the power run has to be brought up to code. We’ll give you the exact number in writing before we start.
Why Summerlin Homeowners Call Vance Gate Repair Summerlin for DoorKing Work

Our technicians have up to 12 years of experience, and we’ve completed 22,000+ gate repair and installation jobs. DoorKing work rewards people who know the operator’s quirks, and we do: the arm geometry, the limit drift, the power requirements. We also service LiftMaster, Mighty Mule, Ghost Controls, and other brands, so we’re the one company that can work on whatever motor is on your gate rather than pushing a replacement.
Under The Haven Standard, every visit leaves a written price before work starts and a documented photo record when the technician leaves. Our technicians are background-checked and uniformed, and you get the name before arrival. The 365-Day Done Right Promise backs every job. We also offer a free second opinion on any written estimate from another company: bring the paperwork to 11150 W. Twain Ave and we’ll review it at no cost.
FAQs
Installation work from us is covered by the 365-Day Done Right Promise, and any DoorKing parts we supply carry the manufacturer’s own warranty. If the installation isn’t right within the year, we make it right at no additional charge. Call (844) 797-2809 for an exact quote.
Usually, yes. We source OEM DoorKing parts and, where an OEM part is discontinued or the operator is out of warranty, quality aftermarket equivalents. We lay out both options and the trade-offs in writing so you can decide. Call (844) 797-2809.
It depends on the specific failure, not the operator’s age. A limit switch or photo-eye fault is a straightforward repair, while a failed board or gearbox on an out-of-warranty unit is worth weighing against replacement. We’ll tell you honestly which makes sense. Call (844) 797-2809.
Most installations are measured, ordered, and scheduled within a few days once the gate style and model are confirmed. A new single-family installation isn’t a same-day repair, and we’ll never promise a dispatch window for work that has to be ordered. You get a written price and a scheduled date up front. Call (844) 797-2809.
Yes. We verify the power run at the operator terminals and set the photo-eyes and safety edges so the gate reverses on an obstruction. Getting these right on a Summerlin driveway install is what keeps the operator reliable. Call (844) 797-2809.
Ready to price your DoorKing gate installation? Call Vance Gate Repair Summerlin at (844) 797-2809 for a free estimate. We’ll measure, give you the written number, and schedule the work around you.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.