Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Motor & Opener for Summerlin Homeowners
When a driveway gate stops mid-track, the problem is almost always in the operator, not the gate itself. In Summerlin, we see this most often on the uphill driveways of The Ridges and Red Rock Country Club, where a failing LiftMaster or FAAC arm has to fight grade every single cycle. Our technicians have up to 12 years of experience diagnosing exactly which component gave out.
We’re Vance Gate Repair Summerlin, and gate motors and openers are what we do. Same-day service is available across Summerlin, and a live person answers the phone 24 hours a day. Call (844) 797-2809 and we’ll get a technician scheduled.
What Our Gate Motor & Opener Service Includes
Motor Installation
Motor installation means fitting a new operator to your existing gate and making sure the arm, bracket, and limit settings match the gate’s actual weight and swing. You need it when an old motor has failed past repair, or when a gate was never automated in the first place. We measure the gate, match the operator to the load, and leave a written record of the model and serial number installed.

Motor Repair
Motor repair covers the failures that don’t require a new unit: a burned-out capacitor, a stripped drive gear, a control board that lost its programming after a power surge. You need it when the gate moves sluggishly, stops halfway, or reverses without warning. We test the motor under load, photograph the fault, and tell you in writing whether a repair or a replacement makes more sense before you commit to either.

Linear Motor
Linear operators use a screw-drive arm that pushes the gate open rather than a chain or belt, and they’re common on single-swing residential gates. You need Linear service when the arm binds, the clutch slips, or the gate travels past its limit stops. We service Linear equipment regularly and know where these units wear: the drive nut and the limit cams are the usual suspects.

Slide Motor
Slide gate operators run a rolling gate along a track, and they fail differently than swing motors: worn rollers, a bent track, or a chain that’s jumped the sprocket will all stall the gate. You need slide motor service when the gate grinds, drifts, or won’t fully close. We check the track, rollers, and operator together, because a slide gate problem is rarely just the motor.
Intercom Integration
Intercom integration connects your gate operator to a call box or entry station so visitors can reach you before the gate opens. You need it when the intercom buzzes but doesn’t trigger the gate, or when you’re adding an entry system to an existing operator. We wire the trigger circuit, test the release, and leave a wiring diagram behind so the next technician doesn’t have to guess.
Battery Backup
Battery backup keeps your gate working through a power outage, which matters more in Summerlin than most people realize given how often monsoon-season storms knock out grid power. You need it when the gate goes dead the moment the power drops, or when the backup battery no longer holds a charge. We test the battery under load and replace it with the correct voltage and capacity for your operator.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Brands We Service for Gate Motor & Opener

We work on nine major gate-automation brands, and the practical benefit is simple: whatever motor is already on your property, we can diagnose it rather than steering you toward a replacement. On LiftMaster operators, we know the control board and the battery backup circuit are the two failure points that show up first. On FAAC arms, we’ve learned to check the encoder and the limit-switch settings before assuming the motor itself has died. With BFT equipment, the clutch adjustment is often the whole story when a gate starts reversing on contact.
We also service Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite. Mighty Mule units are common on DIY-installed residential gates, and we frequently find the solar or low-voltage supply was undersized for the gate’s weight. Whether you have a LiftMaster, a FAAC, or any other make, we can help.
Before
AfterSigns You Need Gate Motor & Opener Right Now
- The gate reverses or stops without warning. An operator that reverses mid-travel usually has a misaligned photo-eye (the infrared beam that stops the gate if something crosses the path) or a failing limit switch. It’s a safety issue, not just an annoyance, because a gate that reverses unpredictably can strike a person or a vehicle.
- The motor hums but the gate doesn’t move. A humming motor with no movement typically means a stripped gear, a dead capacitor, or a clutch that has slipped. Left alone, a stalled motor overheats and can burn out the windings entirely, turning a cheap repair into a motor replacement.
- The gate moves slowly or struggles on grade. Summerlin’s sloped driveways put extra load on every operator, and a motor that’s laboring is telling you something is wearing out. Catching it early usually means a gear or capacitor fix rather than a new unit.
- The remote works only up close. Weak range points to a failing receiver, a dying remote battery, or antenna damage. It’s a quick diagnosis, and we can tell you in writing whether you need a receiver, a remote, or neither.
- The gate stays dead after a power outage. If the gate won’t cycle once the power comes back, the operator has lost its programming or the backup battery has failed. Either way, it needs a technician with a meter, not a guess.
Our Gate Motor & Opener Process – Step by Step

- 1
Call and describe the symptom. A live person answers 24 hours a day, so you’ll talk to someone who can ask the right questions about your gate. We note the brand, the symptom, and whether the gate is swing or slide, which helps us arrive prepared.
- 2
On-site diagnosis. The technician tests the operator under load with a multimeter, checks the limit-switch readings, and inspects the arm, bracket, and track. Every finding gets photographed, including the limit-switch position before and after any adjustment.
- 3
Written price before any work starts. Under Clause 1 of The Haven Standard, you get the flat price in writing and hand it over before a tool comes out. No verbal estimate, no surprise invoice at the end. If you have a written estimate from another company, we’ll review it free of charge as a second opinion.
- 4
Repair or replacement, documented. We complete the work and photograph what was replaced and what was adjusted, including part numbers. That photo log is left with you and filed in the job record, so a future technician starts from evidence instead of scratch.
- 5
Test and hand over the record. We cycle the gate multiple times, confirm the safety reverse works, and walk you through the documentation before we leave. If anything isn’t right within 365 days, the 365-Day Done Right Promise covers it at no additional charge.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Motor & Opener Cost in Summerlin?
A typical gate motor repair in Summerlin runs $180 – $420, depending on the part and the brand. A full motor replacement usually falls between $650 and $1,400 installed, with slide operators and heavier swing arms at the upper end. Battery backup replacement generally runs $150 – $300, and intercom integration typically costs $250 – $500 depending on the entry station.
What moves the price: the brand of operator, whether the arm bracket is intact, the gate’s weight and grade, and whether the wiring needs attention. You avoid overpaying by getting the diagnosis in writing before anyone touches the gate, and by asking for a photo record of the failed part. Under The Haven Standard, the flat price is written and handed over before work starts, and every visit includes that photo log at no additional charge.
| Service | Typical Summerlin Range |
|---|---|
| Motor repair (capacitor, gear, board) | $180 – $420 |
| Full motor replacement, installed | $650 – $1,400 |
| Battery backup replacement | $150 – $300 |
| Intercom integration | $250 – $500 |
Call (844) 797-2809 for an exact quote. Estimates are free, and the written price is agreed before any work begins.
Gate Motor & Opener Near Summerlin – Our Service Area

We serve Summerlin and the surrounding valley: Spring Valley, Las Vegas, Enterprise, Winchester, Paradise, Sunrise Manor, Whitney, North Las Vegas, Henderson, Sandy Valley, and Boulder City. Response times vary by distance, but Summerlin and Spring Valley are typically reached fastest. For broader coverage across the metro, see our Las Vegas gate motor and opener service.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Gate Motor & Opener in Summerlin

A gate motor and opener is the automated operator that swings or slides your driveway gate open and closed on command. It includes the motor, the control board, the safety sensors, and the remote or keypad that triggers it. In Summerlin, most residential gates use either a swing arm operator or a slide operator, and we service both.
Most motor repairs are completed in a single visit of one to two hours, assuming the replacement part is on hand. A full motor replacement typically takes three to four hours. Slide operators and gates needing track or roller work can run longer, and we’ll tell you the expected time in writing before we start.
Most gate motor repairs in Summerlin cost between $180 and $420, depending on the failed component and the brand. A full replacement runs $650 – $1,400 installed. Call (844) 797-2809 for an exact quote; estimates are free and the written price is agreed before any work starts.
Yes, we service LiftMaster, FAAC, BFT, Mighty Mule, Linear, Viking, Ghost Controls, DoorKing, and Elite. We work on whatever motor is already on the property rather than steering you toward a replacement. If you’re unsure of your brand, the technician can identify it on site.
Same-day service is available across Summerlin, and a live person answers the phone 24 hours a day. If your gate is stuck open or won’t close, call (844) 797-2809 and we’ll get a technician dispatched. We don’t use voicemail or callback queues at any hour.
Every completed repair is covered by the 365-Day Done Right Promise: if the work isn’t right within one full year, we make it right at no additional charge. There’s no argument and no expiration within that window. The written record and photo log from your visit are your proof of what was done.
Clear access to the operator and the control box, and make sure someone is home to let the technician in if the gate is inside a fence line. If you have a written estimate from another company, have it ready and we’ll review it free as a second opinion. Beyond that, there’s nothing to prepare; the technician brings the diagnostic tools and documentation.
Schedule Your Gate Motor & Opener Service in Summerlin Today
Whether your gate is stuck, reversing, or simply slow, we can diagnose it and put the price in writing before any work starts. Call (844) 797-2809 for a free, no-obligation estimate. Same-day service is available across Summerlin, a live person answers 24 hours a day, and every visit leaves a documented photo record of what we found and what we fixed.
Written by the team at Vance Gate Repair Summerlin.