Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Welding & Fabrication: The Summerlin Owner’s Guide
We repair and replace the welded steel components on Ghost Controls driveway gates in Summerlin, and most fabrication jobs land between $340 and $1,150 installed, depending on whether we’re re-welding an existing bracket or replacing a hinge post, arm mount, or gate frame section outright. Same-day service is available for weld repairs that don’t require a custom-fabricated part. Most Summerlin owners don’t discover a fabrication problem until the gate starts to sag, drag, or bind – the welds crack slowly, and the first sign is usually a gate that closes a half-inch lower than it used to. By the time the motor strains or a hinge rips loose, the crack has typically been growing behind the paint for months.
Which Ghost Controls Models This Applies To
Ghost Controls builds primarily for the DIY and light-residential market – the TSS1, TDS2, and ARD series arms mount to gate frames using bolted brackets and welded steel hinge posts, and it’s those mounts and posts that fail earliest. The automation itself is rarely the problem. Before we quote anything, we identify the exact arm model from the label on the housing and measure the bracket spacing in inches, because Ghost Controls changed its mounting-plate footprint between production runs in the mid-2010s and aftermarket brackets that fit one series won’t line up on another. That measurement is the single most common compatibility gotcha on these gates.
On the OEM-versus-aftermarket question: Ghost Controls sells replacement brackets and arm hardware direct, but the gate-side fabrication – hinge posts, frame gussets, weld repairs – isn’t a factory part at all. It’s local steel work, and that’s where an independent fabricator matters. We’re not affiliated with Ghost Controls; we service their equipment and thousands of other gates, and we don’t steer you toward a new motor when the frame just needs welding. Ghost Controls is one of nine automation brands we work on, alongside LiftMaster, Mighty Mule, and DoorKing.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Welding & Fabrication Is Failing

Summerlin’s dry heat and intense UV load what most welds never see in milder climates. Here’s what we find:
- A hairline crack at the hinge post weld. Thermal cycling expands and contracts the steel daily, and a weld that wasn’t fully penetrated from the start opens along that seam. This is the most common failure we see on Summerlin gates, and it’s easy to miss because the crack stays tight until it doesn’t.
- The gate sags and drags on the ground. A cracked weld at the post or a bent hinge lets the gate drop. Once it drags, the Ghost Controls arm is fighting extra load it was never sized for, and the operator itself starts to fail within weeks.
- The arm bracket is bent or wallowed out. If the bracket that anchors the Ghost Controls arm to the gate frame has elongated bolt holes or a bent flange, the arm swings out of alignment and the gate binds at the halfway point. This usually follows a hard wind event or someone leaning on the gate.
- Rust bleeding through paint at a seam. Summerlin is dry, but irrigation runoff and morning condensation collect at weld seams, and rust starts inside the joint before you see it on the surface. Rust streaking under a weld is a warning, not a cosmetic issue.
- The gate racks (twists) when it moves. A twisted frame means a weld has moved. Racking stresses the Ghost Controls arm and the hinges together, and it gets worse every cycle until something gives.
See the difference
Before
After
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what fabrication work on a Ghost Controls gate runs in Summerlin. The price is written and handed to you before any tool comes out – no “call for a quote,” no invoice bigger than the number you agreed to.
| Job | Installed price range |
|---|---|
| Weld repair (re-weld a cracked hinge, bracket, or frame seam) | $340 – $550 |
| Replace a bent Ghost Controls arm bracket | $400 – $680 |
| Rebuild or replace a hinge post | $650 – $1,150 |
| Custom-fabricated gate-frame section or gusset | $850 – $1,400 |
What drives the range is how much steel we’re replacing and whether the gate has to come off its hinges. Parts and labor are quoted separately so you can see both. Every completed fabrication job is covered by our 365-Day Done Right Promise – if the weld isn’t right, we make it right, no charge, no argument. Before we leave you get a photo log of the finished weld and the gate re-hung and cycled.
DIY or Call Us?

There’s a real split here, and it comes down to whether the job is inspection or structural welding. An owner can safely do the inspection side: look for cracks at the hinge post with a flashlight, check whether the gate drags or racks, and wipe a weld seam to see if rust is bleeding through. That tells you whether you have a problem worth a call.
The welding itself is where DIY goes wrong. Gate-frame steel carries the full weight and swing load of the gate and the Ghost Controls arm, and a weld that looks fine but isn’t fully penetrated will crack again in a few months – often mid-cycle, with the gate falling. Welding near a painted gate also risks heat damage and even fire from debris inside the frame. Tacking a bracket with a box-store welder is how a $400 repair becomes a $1,100 one. If the gate is cracked, bent, or dragging, call us at (844) 797-2809 for a free estimate and we’ll tell you honestly whether it’s a weld repair or something simpler.
FAQs
A properly executed weld on a residential gate should hold 10 to 15 years or more, but factory welds under Summerlin’s daily thermal swing often fail sooner – five to eight years is a realistic range we see. What fails first is the hinge-post weld, because it carries the most load and gets the most heat cycling. Call us at (844) 797-2809 for a free estimate if your gate is past that window.
Almost always, yes. A cracked or failed weld can usually be re-welded, and a bent bracket can be straightened or replaced without touching the operator or the rest of the frame. We recommend the repair when the surrounding steel is sound, and we’ll tell you plainly when a full replacement is the better buy. Call (844) 797-2809 and we’ll price both so you can decide.
Most weld repairs and bracket replacements are done same day, typically within two to three hours on site including cutting out the failed weld, re-welding, re-hanging the gate, and cycling it with the Ghost Controls arm to confirm alignment. Custom-fabricated frame sections take longer because the steel is measured, ordered, and scheduled. Call (844) 797-2809 for a free estimate and we’ll give you the timeline in writing.
We identify the exact Ghost Controls model and measure the bracket footprint, then order the correct replacement bracket or fabricate the gate-side component to fit it – we don’t carry parts on a truck, so the right part is sourced specifically for your gate rather than guessed. OEM brackets are used where they’re available and a quality equivalent is used where they’re not, and you get the part number in writing. Call (844) 797-2809 for a free estimate.
Trusted in Summerlin. Every job comes with a written price before work starts, a photo record when we leave, and our 365-Day Done Right Promise. Call (844) 797-2809 for a free estimate today.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.