Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Access Control Installation: The Summerlin Owner’s Guide
We install Ghost Controls-compatible access control on Summerlin driveway gates, and most electronic access-control jobs (keypads, remote receivers, exit wands, intercom entry) run $320 to $760 installed, depending on how many entry points you want to control and whether a power run is needed. Free keypad and receiver swaps are often same-day; full multi-point installs are measured and scheduled. Owners usually discover the problem the same way: the keypad that worked all winter stops taking the code in May, or the gate opens from the car but not from the pedestrian button.
Which Ghost Controls Models This Applies To
Ghost Controls builds its control electronics around the AXO, AXR, and DTP series arms, plus the Tower and TDS operator lines, and the accessory layer (keypads, receivers, exit sensors, photo-eyes) is largely shared across those families. The gotcha in Summerlin is board revision, not model name. Ghost Controls has shipped at least three receiver-board revisions across the AXO line, and the plug pinout changed between them. That means a keypad or receiver ordered by model number alone can fit the housing and still not talk to the board. Before you buy anything, photograph the label on the inside of the control box: it lists the board revision and the accessory compatibility line. If you can’t read it, measure the receiver plug across the pins. The decision between Ghost Controls OEM parts and quality aftermarket equivalents is real: for common items like photo-eyes and keypads, aftermarket units from brands we already service (LiftMaster, Mighty Mule) are often more reliable and cost less, and the trade-off is usually a wiring adapter. For the main receiver board, stay OEM.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Signs Your Ghost Controls Access Control Installation Is Failing

- Keypad accepts the code but the gate doesn’t move. Nine times out of ten the receiver is healthy and the relay on the board has failed open, so the code is read but the trigger never reaches the operator.
- Gate opens from the car remote but not the keypad or exit wand. A shared-accessory problem: the accessory bus is dead even though the operator still answers its primary receiver. Power at the board, not the accessory, is usually the fault.
- Intermittent operation in afternoon heat. Summerlin gate control boxes routinely hit 130°F-plus inside by 3 p.m. in July. A failing receiver board will work in the morning and quit by mid-afternoon, which is easy to misread as a sun or shadow issue on the photo-eye.
- Photo-eye trips with nothing in the path. Alignment drifts with ground movement and thermal expansion; the beam can be off by an inch and still be “aligned” to the eye. We measure, not eyeball.
- Exit wand only works when a car is directly on top of it. The detection loop sensitivity has drifted downward, either because the wand is failing or because the board’s sensitivity trim needs to be reset.
See the difference
Before
After
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Summerlin is quoted in writing before any work starts, and here is the range you should expect:
- Keypad replacement (Ghost Controls-compatible, wired or wireless): $180 to $320 installed.
- Access receiver swap or board replacement: $260 to $480 installed.
- Photo-eye replacement, pair: $160 to $280 installed.
- Exit wand / vehicle detector install: $340 to $620 installed, depending on whether a loop is involved.
- Multi-point install (keypad plus exit wand plus receiver, one gate): $620 to $1,140 installed.
What drives the range is the number of entry points, whether a power run is needed (roughly $8 to $14 per foot of trench and conduit in Summerlin), and whether the existing wiring is usable. Every job includes a written photo record on every visit and the 365-Day Done Right Promise on all completed work.
DIY or Call Us?

You can safely swap a wireless keypad that is already paired with the receiver, and you can clean and align photo-eye lenses, provided you kill power at the breaker first. That is the honest ceiling. Where DIY goes wrong is anything that opens the control box or touches low-voltage wiring: the accessory bus runs 24V, a mis-pinned adapter can cook the receiver board, and photo-eye misalignment is not something the eye can correct. Ghost Controls low-voltage wiring itself is not lethal, but the 120V feed to the operator transformer is, and we’ve walked into enough half-finished installs to say it plainly. If you’re not sure which side of that line you’re on, call us at (844) 797-2809. Estimates are free.
FAQs
Expect five to seven years on a receiver board and three to five on a keypad in Summerlin. The control box heat is the single biggest factor: a box shaded by a masonry wall or a palm canopy runs 15 to 20°F cooler than one in direct afternoon sun and consistently goes two years longer.
Sometimes, yes, and we’ll tell you which. A photo-eye with a cracked lens or a drifted trim pot is often repairable; a receiver board with a blown relay and a lifted pad usually is not. We diagnose first and write the price either way before touching the tool bag.
A keypad or receiver swap is typically one to two hours on site. A full multi-point install is scheduled on a half-day window. We confirm timing in writing when we quote.
We read the board-revision label first, then order to that revision, not to the model name. Vance Gate Repair Summerlin is an independent service provider and is not affiliated with Ghost Controls. We service nine gate-automation brands and won’t steer you toward a replacement when a part will do.
If your Ghost Controls access control has failed, stopped accepting its code, or started acting up in Summerlin afternoon heat, call (844) 797-2809 for a free estimate. We’ll write the price before we start, leave you a photo record of what we found and what we installed, and back the work with the 365-Day Done Right Promise. A live person answers 24 hours a day.
Written by the team at Vance Gate Repair Summerlin, serving Summerlin and nearby areas.