Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Whitney
A sticking driveway gate is usually a hinge, a post footing, or a tired control board, and most of the gates we open in Whitney are one of those three. Every repair begins with a written price in your hands before a tool comes out, and it ends with a photo record of what we found, what we adjusted, and what we installed. Whitney’s mix of 1970s-to-1990s tract homes near the flood-control wash and the desert edge means we spend as much time on rusted posts and out-of-square frames as on operators. Call (844) 797-2809 and a live person answers, any hour.

Why Vance Gate Repair Summerlin Is Whitney’s Preferred Gate Repair Company
We’ve repaired and installed more than 22,000 gates since 2014, and every one of those jobs left the homeowner with a written price before work started and a documented record when the technician left. In Whitney, that habit matters because so many gates here are original builder-grade hardware now 25 to 40 years old – the kind of work where a photo of the limit-switch setting saves the next technician an hour of guesswork.
Our technicians have up to 12 years of experience, and they arrive background-checked with a name and photo sent before they reach the driveway. Whitney sits inside ZIP code 89122, and our crews know the difference between a gate on a Whitney lot and one a mile east in Henderson. If another company has already handed you a written estimate, bring it and we’ll review it at no charge as a free second opinion.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Whitney

Electric Gate Repair
Electric gate repair in Whitney starts with the control panel, not the operator housing. Many of these gates run 1990s LiftMaster or Linear boards that no longer accept a modern safety photocell, so we test the board, the photo-eye beam, and the wiring before recommending anything. If the board is dead and obsolete, we tell you that plainly and price the retrofit in writing.
Automatic Gate Repair
Automatic gate repair covers the motor, arm, and every safety device that keeps the gate from closing on a person or a car. We service Viking and Ghost Controls units as readily as older brands, and each visit ends with a documented reading of where the limit switches sit. A gate that reverses for no reason is often a misaligned photo-eye, not a failing motor.
Hinge & Post Repair
Hinge and post repair is the most common job we run in Whitney. Blowing sand and flash-flood debris along the wash edge undermine post footings, which lets a swing gate sag until the hinges seize. We reset the post, correct the footing, and photograph the new hinge position so you can see exactly what changed.
Gate Realignment
Gate realignment handles slide gates that bind in the track or jam against the rack and pinion. Summer ground movement and monsoon wind gusts push a Whitney gate out of square faster than most homeowners expect. We true the frame and adjust the track, then document the alignment before we leave.
Before
AfterTrusted Brands We Service in Whitney
We work on nine major gate automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t keep parts on a truck and we don’t steer you toward a replacement when a repair will do. If your operator is a DoorKing or an older Elite, we can diagnose it and order the right part rather than telling you the whole system is obsolete. Turnaround is quick because we’ve already worked on most of the hardware in Whitney.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Whitney Homes

The pattern in Whitney is different from newer subdivisions because the gates themselves are older and the ground moves:

- Obsolete 1980s and 1990s control boards in builder-grade operators that won’t accept a modern safety photocell or keypad upgrade. The board fails quietly, and the homeowner assumes the whole motor is gone.
- Hinge posts and footings undermined by blowing sand and debris from the wash, which lets a swing gate drop and seize at the hinge. Tightening the hinge never fixes this – the post itself has moved.
- Summer shrink-swell movement and monsoon gusts knocking slide gates out of alignment, jamming the track. The gate runs fine in calm weather and binds the moment the wind picks up.
- Rust on original wrought-iron and aluminum gates from extreme UV and dry desert air, which eats the weld at the hinge plate before it shows anywhere else.
Pricing for Gate Repair in Whitney, NV
Most hinge and post repairs in Whitney run $275 to $650, depending on whether the footing needs resetting. Electric and automatic gate repairs – control board replacement, photo-eye alignment, limit-switch adjustment – typically land between $195 and $720, with board replacements on the higher end. Gate realignment for a binding slide gate generally runs $185 to $380. A full operator retrofit onto an existing frame is a bigger number and we price it in writing after we’ve seen the post and the panel. Every quote is agreed with you before any work starts, so the invoice never surprises you. Estimates are free.
We Also Serve Cities Near Whitney

Whitney borders Sunrise Manor to the north and Winchester to the west, and we also cover Paradise and Las Vegas. If you’re just across the line, our Gate Repair team works those addresses too. You can read more about how we handle Gate Repair in Whitney and nearby communities on our city page.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Whitney

Often it can be retrofitted, but not always. If the existing operator still has a working control board and the frame is sound, we can usually add a modern safety photocell and entrapment protection without replacing the motor. When the board is obsolete and won’t accept the new safety devices, a new operator is the cheaper answer. We’ll tell you which case you’re in after we see the panel – call (844) 797-2809 for a free estimate.
Because the hinge isn’t the problem – the post or its footing has moved. In Whitney, blowing sand and flood-wash debris undermine the footing, so tightening the hinge just pulls the screw through soft ground. We reset the post and photograph the new position. Call for a written price before any work starts.
Yes. Whitney is in unincorporated Clark County, so gate permits and code enforcement follow county rules rather than City of Henderson or Las Vegas codes. An older gate that would have to be brought up to current standards during a repair inside a Henderson subdivision may be handled differently on a Whitney lot. We factor that into the scope and price we write for you.
Wind plus ground movement is pushing the gate out of alignment and binding the rack or track. Summer shrink-swell soil and monsoon gusts do this to Whitney slide gates regularly. Realignment usually solves it, and we document the corrected track position before leaving. Call for an exact quote – estimates are free.
Usually yes, provided the frame and post are sound and the operator can accept the accessory. A solar opener needs enough sun on the panel location, which most Whitney driveways have. We’ll confirm what your gate can take and put the price in writing first. Call (844) 797-2809.
If your gate is sagging, binding, or running on a control board older than your kids, call us at (844) 797-2809 for a free estimate. You’ll get a written price before anything starts and a documented photo record when we’re done.
Written by the team at Vance Gate Repair.