Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Enterprise
If you live in Enterprise, you already know your gate takes a beating most of the year. The Mojave sun pushes past 110°F in summer, spring wind drags grit into every hinge and latch, and the original builder-grade iron and vinyl gates on this side of the valley weren’t built to shrug off twenty years of it. We’re familiar with that here. Our Gate Repair team works Enterprise’s HOA subdivisions regularly, from the townhomes off the 215 to the pool-gate enclosures behind the tract streets in 89139, and we can usually reach you the same day. Call (844) 797-2809 to get a written price before anyone touches a tool.

Why Vance Gate Repair Summerlin Is Enterprise’s Preferred Gate Repair Company
Enterprise homeowners tend to do their homework before they call, and we respect that. So we price the way we’d want to be priced: a flat written number handed over before work starts, not a verbal guess that grows an extra line item at the end. Under The Haven Standard, every visit leaves you with a photo record of what we found, what we adjusted and what we replaced, filed in the job record so no future technician has to rediscover the same problem you already paid to fix.
Our technicians bring up to 12 years of experience, and they handle nine major automation brands rather than steering you toward a replacement for a motor that just needs a limit switch reset. That matters most in Enterprise, where the operator on your gate may be a LiftMaster or FAAC unit the builder installed years ago and nobody has documented since. A live person answers the phone at any hour, and if you’ve got a written estimate from another company, we’ll review it at no cost before you sign anything.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Repair Services in Enterprise

Automatic Gate Repair
Most of the automatic gate failures we see in Enterprise trace back to an operator running years past its duty rating on a gate that’s drifted out of square. The motor strains against a frame the heat has moved, reverses, stops halfway, and gets blamed for a problem that started at the hinge post. We test the operator, read the limit switches, and photograph the settings before and after so the fix is on record.
Gate Realignment
When a gate drags, binds or leaves a gap at the latch, the panel is usually fine; the frame has expanded or settled and thrown the gate out of plumb. In Enterprise’s 1990s-to-2010s tract homes that sag is almost always climate and soil, not age of ironwork. We square the gate, correct the sag, and re-test the operator against the corrected frame rather than shimming around it.
Hinge & Post Repair
A sagging gate is often a failed hinge post footing, not a tired hinge, so we check the post for plumb and footing integrity before replacing hardware. Fixing the hinges on a post that’s already giving way just buys you a few months. We correct the footing issue, then realign and document the final position.
Electric Gate Repair
Electric gate problems in Enterprise usually surface as a dead operator, a tripped breaker, or a photo-eye that’s been knocked out of alignment by wind or a passing car. We trace the wiring, confirm the entrapment protection is working, and leave the homeowner a wiring diagram so the next service call starts from evidence instead of guesswork.
Before
AfterTrusted Brands We Service in Enterprise
We work on whatever motor is already on your property: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. We don’t stock parts, so we don’t push a brand because it’s sitting on a shelf. We diagnose the unit in front of us, order what’s actually failing, and give you a written price and turnaround before the work begins. If a Mighty Mule or BFT unit can be repaired rather than replaced, that’s the path we’ll quote.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Enterprise Homes

Enterprise is a fast-built suburban belt, and its gate problems look different from an older part of the valley. Here’s what we find most:

- Builder-grade operators on tract homes. Many automatic gates in 89139 run years past their duty rating, and when the motor finally quits there’s often no conduit or power stubbed for a replacement, so the swap turns into a wiring job too.
- Manual gates automated after the build. Homeowners motorize a gate that was installed manual, then discover no buried power run exists. The workaround is an above-ground run or a solar opener, and the tradeoffs are real.
- Heat-warped vinyl and iron frames. Extreme desert heat expands and warps gate frames, throwing them out of alignment and stressing hinges until the hinge post footing gives way.
- Seized hinges and latches from dust and UV. Spring wind packs grit into hinge barrels and latch points, and UV chalking speeds up finish failure, especially after monsoon rains.
What Gate Repair Costs in Enterprise, NV
Here’s the honest range for Enterprise’s market, quoted before any work starts:
- Hinge or post repair: typically $150 – $450, depending on whether the post footing needs correction.
- Gate realignment: typically $120 – $300.
- Lock repair: typically $90 – $220.
- Weld and rust repair: typically $180 – $500, based on the amount of ironwork involved.
- Automatic or electric gate repair: typically $200 – $650 for common operator, limit-switch and photo-eye faults.
What moves the number is the post and the power situation more than the panel. If your gate needs a new power run because nothing was stubbed during the build, that’s quoted separately and in writing before we begin under Clause 1 of The Haven Standard (have it in writing). Estimates are free.
We Also Serve Cities Near Enterprise

Enterprise sits close to a lot of the valley we already cover, so if you’re just outside 89139 we can usually get to you too. Alongside our Gate Repair in Enterprise work, we serve Spring Valley, Paradise, Winchester and Henderson. If you’re near the 215 corridor or just over the line into an adjacent community, call and we’ll tell you straight whether we can reach you.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Repair in Enterprise

Usually no, and it’s the most common reason a gate repair in Enterprise stalls. Most of 89139’s tract homes sit in HOA-planned subdivisions where the Architectural Review Committee has to approve any replacement gate or hardware finish that doesn’t match the community’s original palette. A big-box gate might fit the opening and still fail ARC approval, so we match the builder’s iron pattern and color before ordering. Call (844) 797-2809 and we’ll walk your options before you buy anything.
The usual cause is an operator working against a gate that’s out of alignment, not a dying motor. Heat-driven movement in the frame throws the gate out of square, the operator meets resistance and reverses for safety, and the limit switches read the travel as off. We check alignment and the limit-switch settings first, then the photo-eye, and quote a written price before any repair. Call (844) 797-2809 for a free estimate.
In Enterprise it’s usually the hinge post footing, not the panel. Years of heat and settling let the post shift, and the gate sags because its anchor gave way, not because the iron bent. A qualified tech checks post plumb and footing before touching the hinges, then corrects sag and realigns. We photograph the footing and the corrected position before we leave. Call (844) 797-2809 to book an inspection.
Yes, but the buried power and conduit run that was never stubbed during the build is the real work. Many manual gates in Enterprise get motorized well after the fact, so the choice comes down to trenching a proper run or using an above-ground or solar opener with its own tradeoffs. We measure, order the right operator, and hand you a written price before anything is ordered. Call (844) 797-2809 to schedule a free measure and quote.
Spring dust and wind pack grit into hinge barrels and latch points, and the dry desert air gives it nowhere to flush out, so joints seize and wear faster than in a wetter climate. UV chalking also speeds up finish failure after monsoon rains, which is why a routine clean-and-lube on hinges and latches saves a bigger repair later. We document what we found and what we adjusted on every visit. Call (844) 797-2809 for an exact quote; estimates are free.
When your gate needs attention in Enterprise, the fastest path is a call: (844) 797-2809 gets you a live person at any hour, a written price before work starts, a photo record when we’re done, and the 365-Day Done Right Promise behind the repair. Call Vance Gate Repair today for a free estimate and let’s get your gate squared away.
Written by the team at Vance Gate Repair.