Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Parts & Welding Across Las Vegas
Gate parts and welding work in Las Vegas is mostly about the post, the hinge, and the power run – not the control panel, which is where most homeowners start looking. Our technicians have up to 12 years of experience and know how builder-era gates in Las Vegas fail: footing shift in desert soil, powder-coat cooked by afternoon sun, and an operator bolted onto a gate that was never wired for one. Call (844) 797-2809 and a live person answers, day or night. You get a written price before anyone picks up a tool.

Why Vance Gate Repair Summerlin Is Las Vegas’s Preferred Gate Parts & Welding Company
Las Vegas customers tend to arrive already informed, and that suits how we work. Every visit starts with The Haven Standard: a written scope, a written price, and a photographic record of what we found and what we changed. You see the hinge post out of plumb in a photo before you agree to any welding.
We’re independently owned and operated, and we service nine gate-automation brands rather than steering you toward a replacement motor. Response to Las Vegas is fast on repairs and emergencies, and a live person answers the phone 24/7, no callback queue at any hour. On new construction and full automation we measure, order, and schedule, and the written price comes first.
We’ve completed 22,000+ gates repaired and installed, carried by a 365-Day Done Right Promise: if a repair isn’t right, we make it right within that window at no additional fee. For Las Vegas gates that means a weld, a hinge set, or a post reset we stand behind long after the summer heat has had a go at it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Gate Parts & Welding Services in Las Vegas

Post Replacement in Las Vegas
A gate that drags, binds, or won’t latch square usually has a hinge post that has moved, not a failing operator. In Las Vegas’s expansive desert soil, footings set shallow during the build shift over a handful of summers, and we’ve seen iron gate posts lean noticeably in the caliche-heavy ground of the west and northwest subdivisions. We pull the old post, set a proper footing, and re-hang the gate plumb so the operator arm stops fighting a sagging panel.

Hinge Replacement in Las Vegas
Sun-baked hinges seize and the gate starts to sag at the hinge side, which throws the whole leaf out of alignment. In the master-planned subdivisions our technicians replace welded hinge pins on iron gates and bolt-on hinges on vinyl and aluminum, then re-set the gap so the gate swings without rubbing the strike post. We photograph the original hinge position and the new one before we leave.

Rail Repair in Las Vegas
Monsoon dust and wind abrasion pit bare metal along gate rails, and 110°F summers expand and contract the frame until a rail cracks at a weld seam. We repair cracked rails on wrought iron and welded aluminum, straighten bent rails where the metal allows, and re-secure loose pickets. On HOA-gated streets a bent rail is often cosmetic damage from a delivery truck, and a weld repair keeps the original gate style intact.

Custom Welding in Las Vegas
When HOA rules in places like 89129 require the original wrought-iron style, replacement usually isn’t an option, so a qualified welder repairs the existing gate instead. We weld hinge plates back onto posts, close cracks in decorative scrolls, and re-attach rails that have pulled free of the frame. All welding is done on-site where the gate can be inspected in place, and you get the part numbers and a photo log of the work.
Before
AfterTrusted Brands We Service in Las Vegas
We work on whatever motor is already on the property rather than pushing a replacement. That includes LiftMaster and Linear operators common in newer Las Vegas subdivisions, plus FAAC and Mighty Mule units on older swing gates. We don’t claim to stock parts locally; we identify what’s failing, tell you the part and the lead time in writing, and schedule the repair around it. Fast turnaround means the diagnosis and the written price happen on the same visit.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Parts & Welding Problems We See in Las Vegas Homes

Most of the gate failures we see in Las Vegas trace back to the build, not the motor. Here’s what turns up again and again:

- A manual gate fitted with a builder-grade operator and no dedicated power run. Many gates in Las Vegas’s 1990s – 2010s subdivisions were installed manual and automated later, leaving the operator on an undersized extension cord or a shared irrigation circuit that browns out during monsoon season. The fix starts with a proper power and conduit run, not a new motor.
- Safety photocells tripping in monsoon dust. The infrared beam that stops the gate if something crosses its path goes out of alignment when blowing desert dust coats the lenses. We clean, re-align, and photograph the new position so the next tech isn’t guessing.
- Chalky, sun-bleached powder-coat on wrought-iron gates in 89129. Full afternoon sun bleaches the finish to white and cracks it, exposing bare metal that dust abrasion then pits. Because HOA rules require the original style, weld repair and refinishing beat replacement almost every time.
- Vinyl gates sagging at a shallow hinge post. Vinyl gates in 89134 and 89149 crack and sag after just a few summers because the post footing was set shallow in expansive desert soil, so rack and pinion alignment drifts. Correcting the footing comes before any parts swap.
Pricing for Gate Parts & Welding in Las Vegas, NV
Here are real ranges for the Las Vegas market, quoted before work starts:
- Hinge replacement: $120 – $260 per gate, depending on whether it’s a welded iron hinge or a bolt-on.
- Rail repair and re-welding: $150 – $400 depending on how many seams and pickets are involved.
- Post replacement with a new footing: $400 – $900, higher where the old footing has to be broken out of caliche.
- Custom on-site welding: $90 – $150 per hour, with a firm estimate before we start.
What drives cost is footing depth, metal type, and how much of the existing gate can be saved. The price is written and handed over before any work begins, and there’s no surprise invoice at the end. Estimates are free.
We Also Serve Cities Near Las Vegas

Along with Las Vegas, we cover Gate Parts & Welding in Las Vegas and the surrounding communities of Winchester, North Las Vegas, Sunrise Manor, and Paradise. If your gate sits just outside the city line, call and we’ll confirm coverage and pricing on the phone. Our Gate Parts & Welding team handles post work, hinge replacement, and welding across the metro.
Serving Las Vegas, NV – Our Local Coverage Area
We serve Las Vegas and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gate Parts & Welding in Las Vegas

Yes, it can be done without new conduit, but it usually isn’t the right call. In Las Vegas subdivisions from that era the original build rarely included a dedicated power or conduit run to the gate, so retrofitted operators often end up on a shared irrigation circuit or an extension cord that browns out during monsoon season. The reliable path is a proper dedicated circuit run to the gate, and we’ll quote that in writing before any work. Call (844) 797-2809 to arrange a free measure and written price.
Vinyl cracks and sags because the hinge post footing was set shallow in expansive desert soil, and the material itself loses flexibility after repeated 110°F summers. Iron handles the corner differently, but it isn’t immune. Correcting the post footing and re-setting the hinge is the durable fix. We’ll diagnose it and quote in writing.
It’s most often the safety photocell, especially after monsoon dust coats the lenses. A sun-baked control board can also cause intermittent reversing on older operators. A technician checks the photocell alignment first, then the board, and photographs what was found. Call (844) 797-2809 for an exact quote, free of charge.
Yes, in most cases it can be welded and refinished rather than replaced. Sun-bleached powder-coat that has cracked and exposed bare metal is repaired by welding the affected seams and re-coating to match the original style your HOA requires. We document the repair with photos for your records. Call for a free estimate.
You check whether the post is still plumb before touching the rack, because a shifted post throws the panel out of alignment and stresses the operator arm. If the post has moved, correcting the footing and re-hanging the gate comes first, and the rack and pinion can then be re-set cleanly. Call (844) 797-2809 for a free estimate.
Whether you’re in 89134 with a sagging vinyl gate or 89129 with an HOA-mandated iron gate that needs welding, we quote in writing and leave a photo record behind. Call (844) 797-2809 for a free estimate on gate parts and welding in Las Vegas.
Written by the team at Vance Gate Repair Summerlin.